Hearth and Home Technologies FI42S, FI42ML, FI36S, FI36M For Your Safety Read Before Lighting

Page 10

E. Operating Instructions for the “M” Series

FOR YOUR SAFETY READ BEFORE LIGHTING

WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

A.This appliance has an intermittent pilot. When lighting the pilot, follow these instructions exactly.

B.BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle to the floor.

WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance.

•Do not touch any electric switch; do not use any phone in your building.

•Immediately call your gas supplier?from a neighbor's phone. Follow the gas supplier's instructions.

•If you cannot reach your gas supplier, call the fire department.

C.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

Due to high surface termperatures, keep children, clothing and furniture away.

Keep burner and control compartment clean. See installation and operating instructions accompanying the appliance.

FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

LIGHTING INSTRUCTIONS

1.STOP! Read the safety instruction label.

2.Turn wall switch to the "OFF" position.

GAS

CONTROL

KNOB

3.Wait five minutes to clear out any gas. If you smell gas, STOP! Follow "B" on the safety information label. If you don't smell gas, go to next step.

4.Locate pilot assembly inside unit.

PILOT

 

 

 

FLAME

BURNER

 

 

SENSOR

 

 

 

5.To light pilot and main burner, turn wall switch to "ON". Do not light by hand.

6.If appliance will not operate, follow the instructions "TO TURN OFF GAS TO APPLIANCE" and call your service technician or gas supplier.

IGNITOR

TO TURN OFF GAS APPLIANCE

1.Turn on/off switch to "OFF".

34006

10

33734 Rev J

1/11

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Installation & Operating Instructions Imperial Gas Logs Table of Contents Heatilator Imperial Gas Log Set consists of the following Listings and Code ApprovalsDescription of the Imperial Gas Log Set Imperial Series NomenclatureModel No BTU/Hr. Input Orifice Minimum Dimensions High Altitude InstallationImportant Information Unpack the Log Set Step-by-Step InstallationInstall the Damper Stop Position the Log Set in the FireplaceLava Rock Grate AssemblyPlace the Rock Wool, Fire Glow, Lava Rock and Vermiculite Place the Logs Rear LogSeries Intermittent Pilot Wiring Diagram Intermittent Pilot IgnitionFor Your Safety Read Before Lighting Operating Instructions for the M SeriesFor Your Safety Read Before Lighting Operating Instructions for the S SeriesGlass Doors CleaningInspecting the Venting System Replacement Parts Important SafeguardsOwner Registration/Warranty ServicingFi36M Part number list on followingStocked At DepotFi42M Fi42M Troubleshooting M Series Symptoms Possible Causes Corrective ActionTroubleshooting S Series Accessory Parts For M Series Only Limited Lifetime Warranty Hearth & Home Technologies IncWarranty Conditions This warranty is void if

FI36SL, FI36ML, FI42SL, FI36M, FI36S specifications

Hearth and Home Technologies is a leading manufacturer of high-quality fireplaces, and their series of gas inserts, including the FI42S, FI42ML, FI42M, FI36S, and FI36M, exemplify innovation and modern design in home heating solutions. Each model in this lineup brings unique features, advanced technology, and aesthetic appeal, ensuring they meet diverse consumer preferences.

Starting with the FI42S model, it is designed to provide a powerful heating solution with its expansive viewing area. The FI42S boasts a sleek and contemporary design that fits seamlessly into any living space. Its efficient gas-burning system optimizes heat output while maintaining lower emissions, making it both an environmentally conscious choice and a cost-effective one in terms of energy consumption.

Transitioning to the FI42ML, this model features a modern linear design, emphasizing style without sacrificing functionality. The FI42ML provides a wide flame viewing area, which enhances the ambiance of any room. With its multi-function remote control, users can effortlessly adjust settings to create the perfect atmosphere at the push of a button, seamlessly merging convenience with luxury.

Next is the FI42M, a model that prioritizes versatility and performance. Equipped with innovative heating technologies, it allows for customizable flame and heat settings, making it a great option for those who desire a personalized experience. Its larger size also means it can accommodate more substantial spaces, providing warmth and comfort for gatherings with family or friends.

The FI36S and FI36M models cater to those looking for efficient heating in slightly smaller dimensions. The FI36S combines traditional styling with modern performance, making it an excellent fit for both classic and contemporary interiors. On the other hand, the FI36M enhances the minimalist aesthetic with its streamlined design and provides outstanding energy efficiency, reducing environmental impact while ensuring optimum warmth.

All models feature Hearth and Home Technologies' proprietary technology and safety features, including advanced venting options, allowing installation flexibility while ensuring safe operation. In summary, the FI42S, FI42ML, FI42M, FI36S, and FI36M represent the pinnacle of fireplace design. With their focus on efficiency, advanced features, and stunning aesthetics, these gas inserts redefine comfort and style in home heating solutions. These models are perfect for homeowners seeking a balance of functionality, aesthetics, and innovation in their fireplaces.
Top Page Image Contents