Hampton Bay 68-ATR owner manual Safety Rules, Read and Save These Instructions

READ AND SAVE THESE INSTRUCTIONS

1.To reduce the risk of electric shock, insure electricity has been turned off at the circuit breaker or fuse box before beginning.

2.All wiring must be in accordance with the National Electrical Code ANSI/NFPA 70-1999 and local electrical codes. Electrical installation should be performed by a qualified licensed electrician.

3.WARNING: To reduce the risk of fire or electric shock, this fan should only be used with fan speed control part no. FAN28R-240W, manufactured by Chia Wei Electric Co. Ltd.

4.CAUTION: To reduce the risk of personal injury, use only the screws provided with the outlet box.

5.The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 50 pounds. Use only UL Listed outlet boxes marked “FOR

FAN SUPPORT.”

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY, MOUNT TO A REINFORCED OUTLET BOX CAPABLE OF RELI- ABLY SUPPORTING 50 LBS MINIMUM (22.7 KGS) USING THE MOUNT- ING SCREWS PROVIDED WITH THE OUTLET BOX. NOTE: MOST OUTLET BOXES DESIGNED TO SUPPORT LIGHT FIXTURES ARE NOT ACEPTABLE FOR SUPPORTING A FAN, AND MAY NEED TO BE RE- PLACED. CONSULT A QUALIFIED, LICENSED ELECTRICIAN FOR EX- ACT SPECIFICATIONS.

8.To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.

9.Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be suitable for most cleaning.

10.After making electrical connections, spliced conductors should be turned upward and pushed carefully up into outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.

11.Electrical diagrams are for reference only. Light kits that are not packed with the fan must be UL Listed and marked suit- able for use with the model fan you are installing. Switches must be UL General Use Switches. Refer to the instructions packaged with the light kits and switches for proper assembly.

12.All set screws must be checked and retightened where necessary before installation.

TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE BLADE BRACKETS (ALSO REFERRED TO AS (“FLANGES”) DURING ASSEMBLY OR AFTER INSTALLATION. DO NOT INSERT OBJECTS IN THE PATH OF THE BLADES.

6.The fan must be mounted with a minimum of 7 feet clearance from the trailing edge of the blades to the floor.

7.Avoid placing objects in path of the blades.

TO REDUCE THE RISK OF SHOCK. THIS FAN MUST BE INSTALLED WITH AN ISOLATION WALL CONTROL/SWITCH.

Safety Rules 1.