Specifications
Battery Requirements | Standard 9VDC “radio” battery | |
|
| |
Sensitivity | Adjustable using rotary switch | |
|
| |
Display | Audible warning | |
|
| |
Power Switch | Push/Release Button | |
Feature | Bright White LED Spotlight | |
Operating Temperature | ||
Relative Humidity less than 80% | ||
|
Unpacking
When unpacking, make sure item is intact and undamaged. If parts are missing or broken, call Harbor Freight Tools at the number shown on the cover of this manual.
List of contents
Description | Q’ty |
Hand Held Metal Detector | 1 |
9VDC Battery | 1 |
Carrying Case | 1 |
Set Up Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Battery Installation
1.This item is shipped with the battery installed.
2.To replace battery, slide open battery com- partment cover on back of tool.
3.Remove battery terminal connector and remove dead battery.
4.Replace battery being sure to correctly align battery leads with battery polarity markings.
5.Replace battery compartment cover
.Properly dispose of all used batteries.
SKU 97245 | For technical questions, please call | Page |