Functions
1.This tool is useful for detecting metal embedded in nonmetallic materials. For example, you can detect nails in wood prior to running a board through a planer, jointer or shaper. This will help protect expensive knives and blades from damage.
2.This tool will detect metal at a range of approximately
Operating Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Tool Set Up
1.To increase accuracy, it is useful to test this detector on a sample piece prior to actual use. This provides the chance to adjust sensitivity prior to critical work. A clockwise rotation will increase the sensitivity.
|
|
| Sensitivity Switch | |
| General Operating | |||
|
| |||
| Instructions | Wand | ||
1. | Press and hold the Power | |||
| ||||
| Switch into the ON position. |
| ||
2. | With the power switch in the |
| ||
| ON position, the LED light | LED Spot Light | ||
| will illuminate the detec- |
| ||
| tion area or scanned area. | Power Switch | ||
| Please note: Brightness | |||
|
| |||
| may vary due to workplace lighting. | |||
3.Move the wand portion of the tool over the work material. When metal is detect- ed, the alarm will sound.
4.When work is completed, release the Power Switch button to turn off the tool. Clean, then store the tool in its carrying pouch, indoors, and out of children’s reach after use.
SKU 97245 | For technical questions, please call | Page |