|
| |
| Maintenance And Servicing | |
| Release the Power Switch to turn it off and remove battery | |
WARNING | ||
before performing any inspection, maintenance, or cleaning | ||
| ||
| procedures. | |
| Do not use damaged equipment. If abnormal noise or | |
| vibration occurs, have the problem corrected before further | |
| use. |
Cleaning, maintenance, and lubrication
1.BEFORE EACH USE, inspect the general condition of the tool. Check for loose screws, cracked or broken parts, and any other condition that may affect its safe operation.
2.After Use, wipe external surfaces of the tool with clean, moist cloth.
Troubleshooting
Problem |
| Possible Causes |
| Probable Solutions |
Tool will not operate. | 1. Battery discharged or damaged. | 1. | Check battery for charge or damage. | |
| 2. | Battery leads or connection | 2. | Check battery leads and connections. |
|
| damaged. | 3. | Install new batteries. |
Erratic Warning Alarm | 1. | Tool settings may be corrupted | 1. | Install fresh battery. |
| 2. | Sensitivity is set too high. | 2. | Turn down sensitivity using rotary |
|
|
|
| switch. |
SKU 97245 | For technical questions, please call | Page |