Work Piece and Work Area Set Up

Bar. If needed, repeat the above adjusting steps to achieve the correct tension.

the electrical cord is away from the cutting area.

1.Designate a work area that is clean and well-lit. The work area must not allow access by children or pets to prevent distraction and injury.

2.Route the extension cord along a safe route to reach the work area without creating a tripping hazard or exposing the extension cord to possible damage. The extension cord must reach the work area with enough extra length to allow free movement while working.

3.Secure the extension cord by snapping it in the Power Cord Clip so there will be no tension on the connection between the Power Cord (52) and the extension cord.

4.There must not be objects, such as utility lines, gas or water pipes nearby that will present a hazard while working.

General Operating Instructions

1.Before cutting, remove the Oil Fill

Cap. Inspect the Cap Gasket (21) for damage. Fill the oil reservoir to just below fill plug with Bar and Chain oil (not included). Then replace the Oil

Fill Cap.

2.Stand in front of the wood to be cut with your feet firmly in place.

3.Connect the outdoor rated extension cord (not included) to the Power Cord (52) of the Chain Saw. Make sure

Figure 4	Note: Front Handle Guard not
	shown in illustration

4.Grasp the Handles with both hands. Always grip the handle with the thumb and fingers encircling the handle as show above.

5.Push forward on the Lock-out Switch

(48), then squeeze and hold the Trigger Switch (49). NOTE: The Trigger Switch cannot be activated unless the Lock-out Switch is depressed. With the Chain Saw running, you may release pressure on the Lock-out Switch. Releasing the Trigger Switch will stop the motor.

DANGER! To prevent serious injury and death from kickback: Do not touch the Guide Bar Nose to the wood.

6.When the Chain Saw reaches full speed, begin cutting with a light, downward pressure against the bottom mid-section of the Saw Chain (72). Allow the Saw Chain to cut

at its own rate. Applying too much pressure can damage the tool.

DANGER! When cutting loose, round, wood stock, make sure to place the wood stock on a sawhorse, in a cradle or use a timberjack (all sold

SKU 67255

For technical questions, please call 1-800-444-3353.

Page 13

67255 specifications

Harbor Freight Tools 67255 is a versatile, compact, and highly efficient 2.5 HP portable air compressor designed to meet the demands of both professionals and DIY enthusiasts. This air compressor is loved for its powerful performance paired with a design that prioritizes ease of use and transportability.

One of the standout features of the 67255 is its impressive tank capacity of 4 gallons, allowing for extended air supply between refills, making it perfect for a variety of tasks like inflating tires, powering pneumatic tools, or even painting projects. With a maximum pressure rating of 125 PSI, this compressor delivers consistent pressure for a range of applications, ensuring that users can rely on it for heavy-duty tasks without interruptions.

The 67255 utilizes oil-free pump technology, which significantly reduces the need for maintenance compared to traditional oil-lubricated compressors. This means users can save time and enjoy the convenience of a whisper-quiet operation, as well as enhanced portability due to the absence of oil leaks. Additionally, the oil-free design results in cleaner and healthier air output, making it suitable for indoor use.

For increased safety and efficiency, the compressor features an integrated safety valve and pressure gauge, giving users precise control over the air output and overall operation. The quick-connect air fittings streamline the process of attaching and detaching air hoses and tools, enhancing workflow and productivity when transitioning between different projects.

Portability is another key attribute of the Harbor Freight Tools 67255. Weighing in at a lightweight design and equipped with a handle, it is easy to transport from one job site to another, making it suitable not just for garage use, but also for onsite projects and outdoor activities.

Overall, the Harbor Freight Tools 67255 serves as an outstanding air compressor option for a range of tasks, delivering powerful performance, innovative features, and exceptional ease of use while maintaining a user-friendly and maintenance-light profile. Its combination of portability, efficiency, and affordability makes it a valuable addition to any toolkit, making it a popular choice among contractors, tradespeople, and do-it-yourselfers. Whether you are using it for simple household tasks or more complex projects, this compressor is built to fulfill a wide variety of air needs with reliability and convenience.