Harbor Freight Tools 67255 operating instructions Extension Cords, See Table a, 25’ 50’ 75’

Page 8

National Electrical Code. (See

Outlets for 2-Prong Plug.)

2.Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See

Outlets for 2-Prong Plug.)

Extension Cords

1.Grounded tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord.

2.As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of power and possible tool damage.

(See Table A.)

3.The smaller the gauge number of the wire, the greater the capacity of the cord. For example, a 14 gauge cord can carry a higher current than a 16 gauge cord. (See Table A.)

4.When using more than one extension cord to make up the total length, make sure each cord contains at least the minimum wire size required.

(See Table A.)

5.If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size. (See Table A.)

6.If you are using an extension cord outdoors, make sure it is marked with the suffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use.

7.Make sure the extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified electrician before using it.

8.Protect the extension cords from sharp objects, excessive heat, and damp or wet areas.

9.Use extension cords with at least a gauge wire as large as indicated in Table A for 7.1 to 12.0 Amperes.

10.Keep the cord away from the cutting area. Position the cord so that it will not be caught on branches, and the like, during cutting.

RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*

(120/240 VOLT)

NAMEPLATE

EXTENSION CORD

 

LENGTH

 

AMPERES

 

 

25’

50’

75’

100’

150’

(at full load)

 

 

 

 

 

 

 

 

 

 

 

0 – 2.0

18

18

18

18

16

2.1

– 3.4

18

18

18

16

14

3.5

– 5.0

18

18

16

14

12

5.1

– 7.0

18

16

14

12

12

7.1 – 12.0

18

14

12

10

-

12.1

– 16.0

14

12

10

-

-

16.1

– 20.0

12

10

-

-

-

* Based on limiting the line

TABLE A voltage drop to five volts at 150% of the rated amperes.

SKU 67255

For technical questions, please call 1-800-444-3353.

Page 8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents For technical questions or replacement parts, please call Electric ChainsawContents Save This Manual Chain Saw Safety WarningsKeep Work Area Clean Use ANSI-approved Safety Consider Work Area EnvironmentDress properly GlassesCheck Damaged Parts Power SupplyStay Alert Vibration Safety Outlets for 2-Prong Plug GroundingDouble Insulated Tools Tools With Two Prong Plugs 25’ 50’ 75’ Extension CordsSee Table a Symbology Unpacking SpecificationsChain Saw Features SKU For technical questions, please call Operating Instructions Saw Chain TensionWork Piece and Work Area Set Up General Operating InstructionsBasic Felling, Limbing, Bucking Cut Techniques FellingLimbing BuckingSplintering Guide Bar Care Maintenance ServicingCleaning, Maintenance, Lubrication Sharpening the Saw Chain Replacing the Saw ChainDirection of Saw Cleaning, Maintenance, Lubrication Schedule Weekly MaintenanceMonthly Maintenance If DamagedTroubleshooting Problem Possible Causes Likely SolutionsParts List Part Description QtyAssembly Diagram Parts List Record Product’s Serial Number Here Limited 90 DAY Warranty

67255 specifications

Harbor Freight Tools 67255 is a versatile, compact, and highly efficient 2.5 HP portable air compressor designed to meet the demands of both professionals and DIY enthusiasts. This air compressor is loved for its powerful performance paired with a design that prioritizes ease of use and transportability.

One of the standout features of the 67255 is its impressive tank capacity of 4 gallons, allowing for extended air supply between refills, making it perfect for a variety of tasks like inflating tires, powering pneumatic tools, or even painting projects. With a maximum pressure rating of 125 PSI, this compressor delivers consistent pressure for a range of applications, ensuring that users can rely on it for heavy-duty tasks without interruptions.

The 67255 utilizes oil-free pump technology, which significantly reduces the need for maintenance compared to traditional oil-lubricated compressors. This means users can save time and enjoy the convenience of a whisper-quiet operation, as well as enhanced portability due to the absence of oil leaks. Additionally, the oil-free design results in cleaner and healthier air output, making it suitable for indoor use.

For increased safety and efficiency, the compressor features an integrated safety valve and pressure gauge, giving users precise control over the air output and overall operation. The quick-connect air fittings streamline the process of attaching and detaching air hoses and tools, enhancing workflow and productivity when transitioning between different projects.

Portability is another key attribute of the Harbor Freight Tools 67255. Weighing in at a lightweight design and equipped with a handle, it is easy to transport from one job site to another, making it suitable not just for garage use, but also for onsite projects and outdoor activities.

Overall, the Harbor Freight Tools 67255 serves as an outstanding air compressor option for a range of tasks, delivering powerful performance, innovative features, and exceptional ease of use while maintaining a user-friendly and maintenance-light profile. Its combination of portability, efficiency, and affordability makes it a valuable addition to any toolkit, making it a popular choice among contractors, tradespeople, and do-it-yourselfers. Whether you are using it for simple household tasks or more complex projects, this compressor is built to fulfill a wide variety of air needs with reliability and convenience.
Top Page Image Contents