Harbor Freight Tools 67255 Maintenance Servicing, Cleaning, Maintenance, Lubrication

Page 17

Maintenance And

Servicing

Procedures not specifically explained in this manual must be performed only by a qualified technician.

To prevent serious injury

from accidental operation:

Turn the Power Switch of the tool off and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.

To prevent serious injury from tool failure:

Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.

Cleaning, Maintenance, and

Lubrication

1.BEFORE EACH USE, inspect the general condition of the tool. Check for loose hardware, misalignment or binding of moving parts, cracked or broken parts, dull or damaged Saw Chain, damaged electrical wiring, and any other condition that may affect its safe operation.

2.BEFORE THE FIRST USE, make sure the Oil Tank (18) is filled with Bar and Chain oil (not included). Oil is automatically applied to the Saw

Chain when the Oil Reservoir is full.

3.IF THE SAW CHAIN (72) BECOMES LOOSE, adjust the Saw Chain tension as described under Tool Setup.

4.WHEN NECESSARY, have the Saw Chain (72) sharpened by a qualified technician, following the manufacturer’s instructions.

5.PERIODICALLY, turn the Chain Guide Bar (71) over to distribute the wear on it. Replace the Chain Guide Bar when bent, cracked, or when the Saw Chain (72) moves excessively from side to side on the Chain Guide Bar.

6.AFTER USE, wipe the outside surface of the Chain Saw with a clean, dry cloth. If necessary use a mild detergent. Do not use solvents. Do not immerse this tool in liquid.

Guide Bar Care

Remove the Guide Bar after use to clean and grease.

Groove

Oil Holes

Figure 12

Grease Port

Remove sawdust and sap from the Bar Groove using a Guide Bar Cleaning tool (sold separately), then lubricate the nose sprocket at the ports with motor oil or bar oil.

Reverse the Guide Bar when replacing the Saw Chain to prevent uneven wear.

REV 10h

SKU 67255

For technical questions, please call 1-800-444-3353.

Page 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Electric Chainsaw For technical questions or replacement parts, please callContents Save This Manual Chain Saw Safety WarningsKeep Work Area Clean Consider Work Area Environment Use ANSI-approved SafetyDress properly GlassesCheck Damaged Parts Power SupplyStay Alert Vibration Safety Outlets for 2-Prong Plug GroundingDouble Insulated Tools Tools With Two Prong Plugs 25’ 50’ 75’ Extension CordsSee Table a Symbology Unpacking SpecificationsChain Saw Features SKU For technical questions, please call Saw Chain Tension Operating InstructionsGeneral Operating Instructions Work Piece and Work Area Set UpFelling Basic Felling, Limbing, Bucking Cut TechniquesBucking LimbingSplintering Guide Bar Care Maintenance ServicingCleaning, Maintenance, Lubrication Replacing the Saw Chain Sharpening the Saw ChainDirection of Saw Weekly Maintenance Cleaning, Maintenance, Lubrication ScheduleMonthly Maintenance If DamagedProblem Possible Causes Likely Solutions TroubleshootingPart Description Qty Parts ListAssembly Diagram Parts List Record Product’s Serial Number Here Limited 90 DAY Warranty

67255 specifications

Harbor Freight Tools 67255 is a versatile, compact, and highly efficient 2.5 HP portable air compressor designed to meet the demands of both professionals and DIY enthusiasts. This air compressor is loved for its powerful performance paired with a design that prioritizes ease of use and transportability.

One of the standout features of the 67255 is its impressive tank capacity of 4 gallons, allowing for extended air supply between refills, making it perfect for a variety of tasks like inflating tires, powering pneumatic tools, or even painting projects. With a maximum pressure rating of 125 PSI, this compressor delivers consistent pressure for a range of applications, ensuring that users can rely on it for heavy-duty tasks without interruptions.

The 67255 utilizes oil-free pump technology, which significantly reduces the need for maintenance compared to traditional oil-lubricated compressors. This means users can save time and enjoy the convenience of a whisper-quiet operation, as well as enhanced portability due to the absence of oil leaks. Additionally, the oil-free design results in cleaner and healthier air output, making it suitable for indoor use.

For increased safety and efficiency, the compressor features an integrated safety valve and pressure gauge, giving users precise control over the air output and overall operation. The quick-connect air fittings streamline the process of attaching and detaching air hoses and tools, enhancing workflow and productivity when transitioning between different projects.

Portability is another key attribute of the Harbor Freight Tools 67255. Weighing in at a lightweight design and equipped with a handle, it is easy to transport from one job site to another, making it suitable not just for garage use, but also for onsite projects and outdoor activities.

Overall, the Harbor Freight Tools 67255 serves as an outstanding air compressor option for a range of tasks, delivering powerful performance, innovative features, and exceptional ease of use while maintaining a user-friendly and maintenance-light profile. Its combination of portability, efficiency, and affordability makes it a valuable addition to any toolkit, making it a popular choice among contractors, tradespeople, and do-it-yourselfers. Whether you are using it for simple household tasks or more complex projects, this compressor is built to fulfill a wide variety of air needs with reliability and convenience.
Top Page Image Contents