Inappropriate Places for Installation | Marantz SA-11S1 specification

*To protect your discs from damage, avoid placing them in the following locations.

•Where they will be exposed to direct sunlight or where they will be close to a heater or other heat- radiating appliance

•Where the humidity level is high or it is very dusty

•Near a window or other such location where they may be exposed to rain

*Get into the habit of putting the discs back in their cases after use.

INAPPROPRIATE PLACES FOR

INSTALLATION

To keep your player in perfect working order for the longest possible time, avoid installing the player in the following locations.

• Wherever it will be exposed to direct sunlight

• Wherever it will be close to a heater or other heat-

radiating appliance

• Wherever the humidity is high or ventilation is poor

• Wherever it is very dusty

• Wherever it will be subject to vibration

• On top of a rickety stand or in an unstable location

which is tilted at an angle

• In an audio rack with little space at the top and

bottom or other location where the heat

dissipation will be obstructed

To ensure proper heat dissipation, install the

player while leaving clearances between the

player and wall or other components, as shown

in the figure below.

DO NOT PLACE OBJECTS ON TOP

•Refrain from placing any objects on top of the player.

CAUTIONS ON HANDLING POWER CORD

•Do not touch the power cord with wet hands.

•When disconnecting the power cord, always make sure that you take hold of the plug. Yanking out or bending the cord can damage it and/or cause electric shocks or a fire.

•Get into the habit of disconnecting the power plug before leaving home.

DO NOT ATTEMPT REPAIRS YOURSELF

•Refrain from lubricating the player: doing so can cause malfunctioning.

•Only qualified engineers with specialized expertise are authorized to repair the pick-up and parts inside the player.

PRECAUTIONS

• In winter, droplets of water form on the insides of

the windows of a heated room: this is called

condensation. This player uses an optical lens,

so the condensation may form in the following

cases.

- In a room immediately after the heating has

been turned on

- In a room where the humidity level is high

USING REMOTE CONTROL UNIT

Cautions on handling batteries

Misuse of the batteries can result in electrolyte leakage, rupturing, corrosion, etc.

Bear in mind the following points when using batteries.

•Remove the batteries from the remote control unit if the unit is not going to be used for a prolonged period (a month or more).

•Do not use an old battery together with a new one.

•Insert the batteries while ensuring that their

and poles are properly aligned with the corresponding markings on the remote control unit.

•Batteries with the same shape may have different voltages. Do not use different types of batteries together.

•If electrolyte has leaked, thoroughly wipe the inside of the battery compartment, and then insert new batteries.

•When batteries which are no longer required are to be discarded, follow the directions (regulations) laid down by the local authorities in the area concerned for their disposal.

wInsert the batteries with correct +/– orientation. Two AAA-size (R03) batteries

eClose the battery cover until it clicks shut.

REMOTE CONTROL

Operate the remote control unit (RC-11SAS1) within a distance of approx. 5 m from the infrared signal reception window (remote sensor) on the front of the Super Audio CD player.

Remote control operation may not be possible if the remote control unit’s transmitter is not pointing in the direction of the remote sensor or if there is an obstruction between the transmitter and the remote sensor.

Remote control operating range

ENGLISH

• On top of an amplifier or other component which

dissipates a great deal of heat

*The quality of the laser and other components can be harmed if the player is placed directly on top of an amplifier or other device which generates heat.

- When the player has been suddenly brought

from a cold location into a warm room

Since, in cases like this, the track numbers may not be read and the player is prevented from operating properly, wait about 30 minutes, and then operate the player.

LOADING BATTERIES

Batteries in this remote control unit have a life of approximately 1 year under normal operating conditions. If the remote control unit is not going to be used for an extended period of time, remove the batteries. Also, if you notice that the batteries are

Approx. 5m

	0.1 m or more	•
0.1 m or more	0.1 m or more	0.1 m or more
0.1 m or more		0.1 m or more
		•

0.1 m or more

•

This player may cause interference on a tuner or TV set. If this is the case, place it further away from the tuner or TV set.

Compact discs have much less noise than analog records and hardly any noise is heard before play starts. Bear in mind, therefore, that if the volume control on the amplifier is set too high, you will risk damaging other audio components.

This player is designed to play Super Audio CD and normal Audio CDs only. It cannot play CD- ROMs used with personal computers, game CDs, video CDs or DVDs (video/audio).

starting to run down, replace them as soon as possible.

qRemove the battery cover.

60°

Remote control unit (RC-11SAS1)

•We do not recommend the use of lens cleaners.

SA-11S1 specifications

The Marantz SA-11S1 stands out as a premium SACD/CD player, reflecting the brand’s commitment to high-fidelity audio playback. Designed to meet the expectations of audiophiles, the SA-11S1 offers a blend of advanced technology and classic aesthetics.

One of the prominent features of the SA-11S1 is its ability to playback Super Audio CDs, which utilize DSD (Direct Stream Digital) technology. This format allows for a higher sampling rate than standard CD audio, resulting in clearer, more detailed sound reproduction. The player also supports standard CDs, providing versatility for users who have extensive CD collections.

At the heart of the SA-11S1 is Marantz’s proprietary HDAM (Hyper Dynamic Amplifier Module) technology. This unique approach to circuit design enhances the audio signal, delivering a more dynamic and robust performance compared to conventional audio circuitry. The use of HDAM ensures that the player maintains a high signal-to-noise ratio and low distortion, creating a more immersive listening experience.

The SA-11S1 features an elegant, solid aluminum chassis designed to minimize resonance and enhance durability. The rigid construction not only contributes to the aesthetics but also reduces interference, allowing for cleaner sound output. The attention to detail in the engineering of the chassis is indicative of Marantz's philosophy of creating products that last.

For connectivity, the player comes equipped with both balanced XLR outputs and unbalanced RCA outputs, providing options to suit various audio setups. The balanced outputs help to reduce noise interference, making it an excellent choice for high-end audio systems.

In addition to its exceptional audio capabilities, the SA-11S1 also includes features such as a high-quality headphone amplifier, catering to those who enjoy private listening sessions. The user-friendly interface, with a bright display and straightforward controls, offers an intuitive experience for users.

Ultimately, the Marantz SA-11S1 embodies the ideal balance of sophistication and performance. With its combination of innovative technology, high-quality components, and elegant design, it represents a remarkable addition to any audiophile's audio equipment collection, promising a listening experience that captures the essence of music like never before.