Chapter 3 — Installing the s c anner for the PC 26
Installation of the ha rdware
This section shows you how to set up your SnapScan with your PC. You can find
information on the SCSI interface card, instructions for connecting the scanner to
your PC and instructions for testing the connection.

Installation with the Agfa supplied SCS I card

Installin g t he S C SI in te rf ace card
SnapScan requires a SCSI interface card to work with your PC, PC-AT™, 386,
486, or compatible computer.
We assume that you hav e no ot her SCSI dev ic es ins t alled and t hat y ou us e t he c ard and
cable that are supplied by Agfa.
1. Switch off your computer and disconnect the power cord.
2. Remove the cover of your computer.
3. Find a free 16-bit ISA expansion slot.
❖Note : For mo re info rmation , refe r to y o ur co mput e r manual.
4. Remove the corresponding slot cover from the back of the computer chassis.
Keep the screw that held the cover in place.