Appendix A — Using the trans parenc y opt ion 48
Placing transparent originals
Caution: Always us e t he t emplate f or s c anning t rans parent originals . Make s ure t hat
the calibration sl it is not cov ered by t he t rans parent original and t hat it is c lean.
You need the transparency option to scan transparent originals.
1. Make sure the transparency option is properly installed.
2. Raise the transparency option.
3. Place the template on the glass plate of your scanner. Make sure that the
calibration slit in the template is at the front side and that it is free.
Caution: Make sure that t he c alibrat ion s lit f ac es t he f ront of t he s c anner and is not
covered by t he t rans parent originals .