Gravely 927060-1028 manual Service and Adjustments, Removing and Installing the Hood, Remove

Page 14

SERVICE AND ADJUSTMENTS

WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding.

REMOVING AND INSTALLING THE HOOD (927064)

Two clamping knobs hold the hood to the unit. Turn clamping knobs counterclockwise to remove and clockwise to install (figure 7).

Clamping Knob

Hood

Figure 7

OE0070

 

REMOVE AND INSTALL MOWER DECK

(Figure 8 and 9)

Remove

1.Remove PTO belt (see PTO Belt Replacement on page 21).

2.Disconnect electric clutch connector (item 5).

3.Disconnect guide arms (item 1) from unit.

NOTE: Perform step 4 for 28- and 32-inch mower decks. Perform step 5 for 40-inch mower decks.

4.Remove three lift links (item 3) from mower deck (item 4) and unit (figure 9).

5.Remove pivot pin (item 6) and two lift links (item 3) from mower deck (item 4) and unit (figure 8).

6.Slide mower deck (item 4) out from under unit.

Install

1. Slide mower deck (item 4) under unit.

NOTE: Perform step 2 for 28- and 32-inch mower decks. Perform step 3 for 40-inch mower decks.

2.Install three lift links (item 3) on mower deck (item 4) and unit (figure 9).

3.Install pivot pin (item 6) and two lift links (item 3) from mower deck (item 4) and unit (figure 8).

4.Install guide arms (item 1) on unit.

5.Connect electric clutch connector (item 5).

6.Install PTO belt (see PTO Belt Replacement on page 21).

40-Inch Mower Deck (927064)

12

1. Guide Arm

2. PTO Belt

3. Lift Link

4. Mower

Deck

5. Electric

Clutch

Connector

6. Pivot Pin

3

65

4

Figure 8

OE0120

 

 

GB - 14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Rear-Engine Rider Product reg Istration hereTable of Contents IntroductionSafety Look down and behind before and while backing Hot SurfacesRead the operator’s manual Never carry childrenNo STEP! Always keep feet away from rotating parts Safety RulesKeep people away from unit while operating Always stand clear of discharge areaPage Page Unpack Unit AssemblyTools Required First Time USEIgnition Switch Item Controls and Features FigureSafety Interlock System OperationFilling Fuel Tank Stopping in AN EmergencyStarting and Shutting OFF Engine Operating MowerTransporting Unit Seat AdjustmentMoving the Unit Manually Remove detent pin from unit figure Tip seat forwardMaintenance Schedule Task ActionLubricate Unit Clean Air FilterCheck hydrostatic belt see Hydrostatic Belt Replacement on ZerkRemove and Install Mower Deck Service and AdjustmentsRemoving and Installing the Hood InstallGuide Arm Leveling Mower Deck and Adjusting Mower Deck PitchLeveling Mower Deck Electric ClutchRear Trunnion Figure Adjusting Mower Deck PitchRear Lift Link Front of Mower Ground Deck Rear Blade Cutting HeightInch Mower Deck Figure Remove Mower Blade ReplacementInch and 32-Inch Mower Decks Figure Never weld or straighten mower blades Antiscalp Roller AdjustmentSharpening Mower Blade Do not Sharpen to this PatternInstall Servicing the BatteryBattery Removal and Installation Figure RemoveFront Wheel Alignment Remove Figure Hydrostatic Belt ReplacementPTO Belt Replacement 8 to 7-3/4 19.4 to 19.7 cm Spindle Jam Nut Tie-RodStorage Mower Belt ReplacementInstall Figure Short Term StorageTroubleshooting RunsService Parts Specifications Year Limited Warranty GRAVELY’

927060-1028, 927062-1232, 927064-1440 specifications

The Gravely models 927064-1440, 927062-1232, and 927060-1028 are part of Gravely's esteemed lineup of zero-turn mowers, designed to deliver exceptional performance and durability for both residential and commercial users. Each of these models stands out due to their unique features, advanced technologies, and robust characteristics.

The Gravely 927064-1440 is equipped with a powerful engine, ensuring efficient cuts even in challenging mowing conditions. With a 1440cc engine, this model provides ample horsepower, allowing for faster mowing speeds and improved productivity. Its 60-inch cutting deck is designed for precision, enabling users to tackle larger lawns with fewer passes. The adjustable cutting height feature allows for tailored mowing to suit varying grass types, ensuring a clean and professional finish.

Moving on to the 927062-1232, this model is notable for its compact size without compromising on performance. With a 32-inch cutting deck and a reliable engine, the 927062-1232 is perfect for residential yards and small commercial properties. It boasts a tight turning radius, making it maneuverable in tight spaces, such as flower beds and around trees. This versatility is complemented by a comfortable operator seat and easy-to-use controls, enhancing the mowing experience.

Lastly, the Gravely 927060-1028 offers a balance between power and efficiency with its 1028cc engine and 60-inch cutting deck. This model is engineered for durability, featuring a heavy-duty steel frame that withstands the rigors of regular use. The innovative suspension system enhances ride comfort, allowing operators to navigate uneven terrains with ease. Additionally, the 927060-1028 includes advanced twin-blade technology, ensuring a consistent cut and superior grass discharge.

All these models feature user-friendly interfaces, including intuitive control systems and ergonomic seating, making them accessible for users of all skill levels. The integration of modern technologies such as advanced air filtration and fuel efficiency measures helps prolong engine life and reduce environmental impact.

Overall, Gravely's 927064-1440, 927062-1232, and 927060-1028 zero-turn mowers are engineered for exceptional performance, reliability, and comfort. They represent Gravely's commitment to quality and innovation, making them ideal choices for anyone seeking a dependable mowing solution. Whether for residential lawns or commercial landscaping, these models provide the efficiency and effectiveness that today's users demand.
Top Page Image Contents