Gravely 927064-1440, 927062-1232, 927060-1028 manual Safety

Page 3

DELIVERY

Customer Note: If you have purchased this product without complete assembly and instruction by your retailer, it is your responsibility to:

•Read and understand all assembly instructions in this manual. If you do not understand or have difficulty following the instructions, contact your nearest Ariens Dealer for assistance.

NOTE: To locate your nearest Gravely Dealer, call 1-800-472-8359 or go to www.gravely.com on the internet.

WARNING: Improper assembly or adjustments can cause serious injury.

Before attempting to operate your unit:

1.Make sure all assembly has been properly completed.

2.Understand all Safety Precautions provided in the manuals.

3.Review control functions and operation of the unit. Do not operate the unit unless all controls function as described in this manual.

4.Review recommended lubrication, maintenance and adjustments.

5.Review Limited Warranty Policy.

6.Fill out a Product Registration Card and return the card to the Ariens Company or go to www.gravely.com.

DISCLAIMER

Gravely reserves the right to discontinue, change, and improve its products at any time without notice or obligation to the purchaser.

The descriptions and specifications contained in this manual were in effect at printing. Equipment described within this manual may be optional. Some illustrations may not be applicable to your unit.

SAFETY

WARNING: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the safety instructions in the manuals and on decals could result in serious injury or death.

Slopes are a major factor related to loss-of-control and tip-over accidents. Operation on all slopes requires extra caution.

Tragic accidents can occur if the operator is not alert to the presence of children. Never assume that children will remain where you last saw them.

Gasoline is extremely flammable and the vapors are explosive, handle with care.

Disengage attachment, stop unit and engine, remove key, engage parking brake, and allow moving parts to stop before leaving operator’s position.

SAFETY ALERTS

Look for these symbols to point out important safety precautions. They mean:

•Attention!

•Personal Safety Is Involved!

• Become Alert!

•Obey The Message!

The safety alert symbol is used in decals and with this manual. Understand the safety message. It contains important information about personal safety.

DANGER: IMMINENTLY HAZARDOUS SITUATION! If not avoided, WILL RESULT in death or serious injury.

WARNING: POTENTIALLY HAZARDOUS SITUATION! If not avoided, COULD RESULT in death or serious injury.

CAUTION: POTENTIALLY HAZARDOUS SITUATION! If not avoided, MAY RESULT in minor or moderate injury. It may also be used to alert against unsafe practices.

NOTATIONS

NOTE: General reference information for proper operation and maintenance practices.

IMPORTANT: Specific procedures or information required to prevent damage to unit or attachment.

SAFETY DECALS AND

LOCATIONS

ALWAYS replace missing or damaged Safety Decals. Refer to figure 2 for Safety Decal locations.

GB - 3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Product reg Istration here Rear-Engine RiderIntroduction Table of ContentsSafety Never carry children Hot SurfacesRead the operator’s manual Look down and behind before and while backingAlways stand clear of discharge area Safety RulesKeep people away from unit while operating No STEP! Always keep feet away from rotating partsPage Page First Time USE AssemblyTools Required Unpack UnitOperation Controls and Features FigureSafety Interlock System Ignition Switch ItemOperating Mower Stopping in AN EmergencyStarting and Shutting OFF Engine Filling Fuel TankRemove detent pin from unit figure Tip seat forward Seat AdjustmentMoving the Unit Manually Transporting UnitTask Action Maintenance ScheduleZerk Clean Air FilterCheck hydrostatic belt see Hydrostatic Belt Replacement on Lubricate UnitInstall Service and AdjustmentsRemoving and Installing the Hood Remove and Install Mower DeckElectric Clutch Leveling Mower Deck and Adjusting Mower Deck PitchLeveling Mower Deck Guide ArmFront of Mower Ground Deck Rear Blade Cutting Height Adjusting Mower Deck PitchRear Lift Link Rear Trunnion FigureMower Blade Replacement Inch and 32-Inch Mower Decks FigureInch Mower Deck Figure Remove Do not Sharpen to this Pattern Antiscalp Roller AdjustmentSharpening Mower Blade Never weld or straighten mower bladesRemove Servicing the BatteryBattery Removal and Installation Figure InstallFront Wheel Alignment 8 to 7-3/4 19.4 to 19.7 cm Spindle Jam Nut Tie-Rod Hydrostatic Belt ReplacementPTO Belt Replacement Remove FigureShort Term Storage Mower Belt ReplacementInstall Figure StorageRuns TroubleshootingService Parts Specifications Year Limited Warranty GRAVELY’

927060-1028, 927062-1232, 927064-1440 specifications

The Gravely models 927064-1440, 927062-1232, and 927060-1028 are part of Gravely's esteemed lineup of zero-turn mowers, designed to deliver exceptional performance and durability for both residential and commercial users. Each of these models stands out due to their unique features, advanced technologies, and robust characteristics.

The Gravely 927064-1440 is equipped with a powerful engine, ensuring efficient cuts even in challenging mowing conditions. With a 1440cc engine, this model provides ample horsepower, allowing for faster mowing speeds and improved productivity. Its 60-inch cutting deck is designed for precision, enabling users to tackle larger lawns with fewer passes. The adjustable cutting height feature allows for tailored mowing to suit varying grass types, ensuring a clean and professional finish.

Moving on to the 927062-1232, this model is notable for its compact size without compromising on performance. With a 32-inch cutting deck and a reliable engine, the 927062-1232 is perfect for residential yards and small commercial properties. It boasts a tight turning radius, making it maneuverable in tight spaces, such as flower beds and around trees. This versatility is complemented by a comfortable operator seat and easy-to-use controls, enhancing the mowing experience.

Lastly, the Gravely 927060-1028 offers a balance between power and efficiency with its 1028cc engine and 60-inch cutting deck. This model is engineered for durability, featuring a heavy-duty steel frame that withstands the rigors of regular use. The innovative suspension system enhances ride comfort, allowing operators to navigate uneven terrains with ease. Additionally, the 927060-1028 includes advanced twin-blade technology, ensuring a consistent cut and superior grass discharge.

All these models feature user-friendly interfaces, including intuitive control systems and ergonomic seating, making them accessible for users of all skill levels. The integration of modern technologies such as advanced air filtration and fuel efficiency measures helps prolong engine life and reduce environmental impact.

Overall, Gravely's 927064-1440, 927062-1232, and 927060-1028 zero-turn mowers are engineered for exceptional performance, reliability, and comfort. They represent Gravely's commitment to quality and innovation, making them ideal choices for anyone seeking a dependable mowing solution. Whether for residential lawns or commercial landscaping, these models provide the efficiency and effectiveness that today's users demand.
Top Page Image Contents