Great Dane GSRKW2352S, GSRKA1952S manual Specifications, Getting Quality Service

Page 37

SPECIFICATIONS

Connect Battery

c

CAUTION: Avoid injury! Prevent Battery Explosions:

Keep sparks, lighted matches, and open flame away from the top of battery. Battery gas can explode.

Never check battery charge by placing a metal object across the posts. Use a volt-meter or hydrometer.

Do not charge a frozen battery; it may explode. Warm battery to 16 degrees C (60 degrees F).

1.Connect positive (red) cable to battery positive (+) terminal. Install red terminal cover (A).

2.Connect negative (black) cable to battery negative (-) terminal. Install black terminal cover (B).

Check Machine Safety Systems

Perform safety system check to make sure the electronic safety interlock circuit is functioning properly.

Specifications

Engine

Note: See engine manufacturer’s owner’s manual provided with your machine for engine specifications.

Drivetrain

Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Dual Hydrostatic

Pumps . . . . . . . . . . . . . . . . . .Hydro-Gear PG-1KDA-D61 - PG-1HDA-D41

Wheel Motors . . . . . . . . . . . . . . . . . . . . . . . . . . Hydro-Gear HGD-12-7172

Number of Speeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Infinitely Variable

Electrical System

Charging System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Amp

Ignition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Flywheel

Starter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Solenoid Shift

Fuel System

Fuel Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . Gasoline, Regular Unleaded Fuel Tank Location . . . . . . . . . . . . . . . . . . . . . . On Right Side of Operator Fuel Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.7 L (6.0 gal)

Steering and Brakes

Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dual Control Levers

Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic Park Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tire Contact

Tires

Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 x 8.5 - 8 Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 x 4 - 5 Inflation Rear (Maximum) . . . . . . . . . . . . . . . . . . 69–97 kPa (10–14 psi) Inflation Front (Maximum) . . . . . . . . . . . . . . . . . . 138–173 kPa (20-25 psi)

Battery

Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-volt CCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270-amp Reserve Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 minutes BCI Group Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U1

Capacities

Fuel Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.7 L (6 gal) Hydraulic Oil (With Filter). . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 L (3.3 qt.) Engine Oil (With Filter) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.9 L (2.0 qt.)

Travel Speeds at Full Engine RPM

Forward . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0–14 km/h (0–8.7 mph) Reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0–6.4 km/h (0–4 mph)

Dimensions

Wheel Base

. . 1.12 m (44 in.)

Overall Height

. . 1.22 m (48 in.)

Overall Length

1.47 m (65.5 in.)

Overall Width (with chute up)

. . 1.35 m (53 in.)

Overall Width (with chute down)

1.64 m (64.5 in.)

Recommended Lubricants

Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . See Applicable Engine Manual

Hydraulic Oil . . . . . . . . . . . . . . . . . . . . 5W-50 or 15W-50 All Synthetic Oil

Grease: (This may change for high-speed applications such as cutting units)

. . . . . . . . . . . . . . . . All-Purpose Grease with an NLGI Grade No. 2 Rating

(Specifications and design subject to change without notice.)

Getting Quality Service

Service Literature

If you would like to order a copy of the Parts Catalog or Operator Manual for this machine, contact your Great Dane Dealer. Parts catalogs and operator manuals are also available online at GreatDaneMowers.com.

Parts

We recommend Great Dane quality parts available at your Great Dane dealer.

Part numbers may change, use part numbers listed below when you order. If a number changes, your dealer will have the latest number.

When you order parts, your Great Dane dealer needs your machine serial number and engine serial number. These are the numbers that you recorded in the Product Identification section of this manual.

Great Dane Quality Continues with Quality Service

Great Dane provides a process to handle your questions or problems, should they arise, to ensure that product quality continues with your

Specifications - 35

Image 37
Contents OPERATOR’S Manual Page Introduction Product IdentificationSpecial Messages Record Identification NumbersUnderstanding The Machine Safety Labels Safety LabelsSafety Labels Safety SafetyRotating Blades are Dangerous Using a Spark ArrestorChecking Mowing Area Parking SafelyAvoid Tipping Protect ChildrenKeep Riders Off Avoid High Pressure FluidsTire Safety Maintenance and StoragePrevent Fires Handling Fuel SafelyAvoid Damage to Plastic and Painted Surfaces OperatingOperator Station Controls Miscellaneous ControlsSetting Cutting Height Adjusting Cutting HeightMounting and Dismounting Machine Safely Raising and Lowering Thigh PadTesting PTO Switch Testing Safety SystemsTesting Park Brake Switch Testing Neutral Switch StartUsing Park Brake Testing the Park BrakeUsing the PTO Testing Neutral Switch RunUsing the Hourmeter Using the ThrottleUsing the Motion Control Levers ForwardGentle Left Turn ReverseGentle Right Turn Sharp Left TurnStarting Engine Using Pump Free-Wheel ValvesEngaging Mower Stopping the EngineMowing Tips Transporting Machine on a TrailerMowing Travel Speeds Dismounting to Inspect MowerService Intervals Service IntervalsService Lubrication Lubricating Pump Idler PivotService Engine Cleaning Engine Air Intake Screen and Fan Service Transmission Service TransmissionReplacing Fuel Filter Hydraulic OilChanging Hydraulic Oil and Filter Cleaning Hydraulic Oil Pump Cooling FinsChecking and Replacing Pump Traction Drive Belt Installing Traction Drive BeltRemoving Traction Drive Belt Checking Traction Drive BeltAdjusting Motion Control Return to Neutral RTN Linkages Checking and Adjusting Motion Control LinkagesChecking Motion Control Linkages Picture Note Side frame removed for picture clarityAdjusting Forward and Reverse Speeds Checking and Adjusting Transmission TrackingAdjust Neutral Switch Service Steering & Brakes Service Steering & BrakesService Mower Replacing Mower Deck Drive Belt Service MowerChecking for Bent Mower Blades Sharpening Blades Checking and Replacing Mower BladesReplacing Mower Blades Service Electrical Service ElectricalInstalling Using Booster BatteryCleaning Battery and Terminals Booster Battery Disabled Vehicle BatteryService Miscellaneous Service MiscellaneousTightening Rear Drive Wheel Hardware Removing and Installing Front Caster WheelsChecking Tire Pressure Troubleshooting TroubleshootingElectrical System EngineCheck Park Brake MachineSteering Storage StorageAssembly AssemblyRemoving Machine From Storage Check Hydraulic Oil LevelSpecifications SpecificationsGetting Quality Service Part Numbers Getting Quality ServicePart Number Wiring Schematics Service Miscellaneous Hydraulic Schematics Service Miscellaneous Main Frame Assembly QTY Description FUEL, Hydraulic and Handle Assembly Swivel Adjuster ENGINE, Hydraulic and Mainframe Assembly CLAMP, Hose 1/2 Pinch CLUTCH, Pump Components and Foot Plate Assembly WASHER, .250 Wide Heavy Flat Y Hydraulic Components CAP FUELCOMPONENTS/WIRING Harness Fuel Components Fuel COMPONENTS/WIRING HarnessConsole and Battery Assembly STRIP, Battery Insulator Foot PLATE/CONSOLE Components Foot Plate Components Deck Assembly WASHER, Blade Wheel and Strut ASSEMBLY/PUMP Components Wheel and Strut Assembly Spindle Assembly Spindle Assembly Decal Locations TCU51051

GSRKW2352S, GSRKA1952S specifications

The Great Dane GSRKA1952S and GSRKW2352S are robust, state-of-the-art vehicles engineered for efficiency and performance in the demanding environment of the transportation industry. Renowned for their cutting-edge design and advanced technologies, these models are poised to meet the needs of modern logistics operations.

Both the GSRKA1952S and GSRKW2352S are equipped with powerful engines that deliver exceptional horsepower and torque, ensuring they can handle heavy loads with ease. The GSRKA1952S features a diesel engine that emphasizes fuel efficiency while maintaining optimal performance levels. In contrast, the GSRKW2352S comes with an advanced hybrid powertrain that combines the benefits of electric and diesel power, significantly reducing emissions and fuel consumption without compromising power.

The chassis design of both models incorporates high-strength materials that enhance durability while reducing overall weight, contributing to improved fuel efficiency and handling. The suspension systems are finely tuned, offering superior ride quality and stability, which is particularly beneficial when navigating uneven road surfaces common in freight transport.

Safety is a paramount concern with the Great Dane GSRKA1952S and GSRKW2352S. Both models come with an array of safety features, including advanced braking systems, collision avoidance technology, and enhanced visibility through strategically placed lighting and mirrors. The driver’s cabin is ergonomically designed, offering comfort and convenience, with intuitive controls and a spacious layout that reduces fatigue during long hauls.

Payload capacity is another highlight of these models. With well-engineered features that maximize space and load distribution, both the GSRKA1952S and GSRKW2352S are ideal for transporting a wide variety of goods efficiently. They also incorporate technology that allows for easy tracking and monitoring of cargo, ensuring that deliveries are timely and secure.

The exterior design reflects a commitment to aerodynamics, significantly reducing drag and enhancing fuel efficiency at highway speeds. The innovative use of materials and engineering in these vehicles ensures they are not only efficient but also resilient against the rigors of daily use.

In summary, the Great Dane GSRKA1952S and GSRKW2352S stand out in the competitive world of transportation vehicles. With their blend of power, efficiency, safety features, and advanced technology, these models are perfect for businesses looking to optimize their logistics operations while minimizing their environmental impact. They exemplify the evolution of commercial vehicles, marrying tradition with innovation for a sustainable future in transportation.