Great Dane GSRKW2352S manual Service Intervals, Service Lubrication, Lubricating Pump Idler Pivot

Page 17

SERVICE INTERVALS

Service Intervals

Servicing Your Machine

c

IMPORTANT: Avoid Damage! Operating in extreme conditions may require more frequent service intervals:

Engine components may become dirty or plugged when operating in extreme heat, dust or other severe conditions.

Engine oil may lose efficiency if vehicle is operated constantly at slow or low engine speeds or with frequent short trips.

Please use the following timetables to perform routine maintenance on your machine.

Servicing Engine

See engine manufacturer’s owner’s manual provided with your machine for engine service information.

Break-In (After First 10 Hours)

Check air pressure in tires.

Check wheel bolt torque.

Check and adjust park brake.

Change engine oil and filter.

Check mower deck drive belt tension.

Check hydraulic pump drive belt.

Check transmission neutral adjustment.

Every 40 Hours

Check air pressure in tires.

Check wheel bolt torque.

Check and adjust park brake.

Change engine oil and filter.

Check foam and paper air cleaner elements.

Clean engine shrouds as needed.

Lubricate front caster spindles and wheels.

Lubricate mower deck idler pivot.

Check mower deck drive belt tension.

Lubricate hydraulic pump idler pivot.

Check hydraulic pump drive belt.

Check hydraulic fluid level.

If operating machine in extremely dusty or dirty conditions:

Clean behind engine shrouds and exposed fins.

Remove screws on blower fan screen and clean behind.

Every 100 Hours

Lubricate mower deck spindles.

Clean and gap spark plugs.

Check hydraulic pump drive belt.

Clean behind engine shrouds and exposed fins.

Remove screws on blower fan screen and clean behind.

Every 500 Hours

• Change hydraulic oil and filter.

Yearly

Change fuel filter.

Clean battery.

Change engine oil and filter at least once per season.

Change hydraulic oil and filter at least once per season.

Replace spark plugs.

Service Lubrication

Grease

c

IMPORTANT: Avoid Damage! The recommended grease is effective within an average air temperature range of -29 to 135 degrees C (-20 to 275 degrees F).

If operating outside that temperature range, contact your servicing dealer for a special-use grease.

Use a general all-purpose grease with an NLGI grade No.2 rating.

Wet or high speed conditions may require use of a special-use grease. Contact your Servicing dealer for information.

Lubricating Front Caster Spindles and Wheels

c

CAUTION: Avoid injury! Fingers or loose clothing can get caught in rotating parts. Stop engine and wait for all moving parts to stop before servicing.

Lubricate two spindle grease fittings (A) and two wheel grease fittings

(B).

Lubricating Pump Idler Pivot

Service Intervals - 15

Image 17
Contents OPERATOR’S Manual Page Introduction Product IdentificationSpecial Messages Record Identification NumbersSafety Labels Safety LabelsUnderstanding The Machine Safety Labels Safety SafetyRotating Blades are Dangerous Using a Spark ArrestorChecking Mowing Area Parking SafelyAvoid Tipping Protect ChildrenKeep Riders Off Avoid High Pressure FluidsTire Safety Maintenance and StoragePrevent Fires Handling Fuel SafelyAvoid Damage to Plastic and Painted Surfaces OperatingOperator Station Controls Miscellaneous ControlsSetting Cutting Height Adjusting Cutting HeightMounting and Dismounting Machine Safely Raising and Lowering Thigh PadTesting PTO Switch Testing Safety SystemsTesting Park Brake Switch Testing Neutral Switch StartUsing Park Brake Testing the Park BrakeUsing the PTO Testing Neutral Switch RunUsing the Hourmeter Using the ThrottleUsing the Motion Control Levers ForwardGentle Left Turn ReverseGentle Right Turn Sharp Left TurnStarting Engine Using Pump Free-Wheel ValvesEngaging Mower Stopping the EngineMowing Tips Transporting Machine on a TrailerMowing Travel Speeds Dismounting to Inspect MowerService Intervals Service IntervalsService Lubrication Lubricating Pump Idler PivotService Engine Cleaning Engine Air Intake Screen and Fan Service Transmission Service TransmissionReplacing Fuel Filter Hydraulic OilChanging Hydraulic Oil and Filter Cleaning Hydraulic Oil Pump Cooling FinsChecking and Replacing Pump Traction Drive Belt Installing Traction Drive BeltRemoving Traction Drive Belt Checking Traction Drive BeltAdjusting Motion Control Return to Neutral RTN Linkages Checking and Adjusting Motion Control LinkagesChecking Motion Control Linkages Picture Note Side frame removed for picture clarityAdjust Neutral Switch Checking and Adjusting Transmission TrackingAdjusting Forward and Reverse Speeds Service Mower Service Steering & BrakesService Steering & Brakes Checking for Bent Mower Blades Service MowerReplacing Mower Deck Drive Belt Replacing Mower Blades Checking and Replacing Mower BladesSharpening Blades Service Electrical Service ElectricalInstalling Using Booster BatteryCleaning Battery and Terminals Booster Battery Disabled Vehicle BatteryService Miscellaneous Service MiscellaneousChecking Tire Pressure Removing and Installing Front Caster WheelsTightening Rear Drive Wheel Hardware Troubleshooting TroubleshootingCheck EngineElectrical System Steering MachinePark Brake Storage StorageAssembly AssemblyRemoving Machine From Storage Check Hydraulic Oil LevelGetting Quality Service SpecificationsSpecifications Part Number Getting Quality ServicePart Numbers Wiring Schematics Service Miscellaneous Hydraulic Schematics Service Miscellaneous Main Frame Assembly QTY Description FUEL, Hydraulic and Handle Assembly Swivel Adjuster ENGINE, Hydraulic and Mainframe Assembly CLAMP, Hose 1/2 Pinch CLUTCH, Pump Components and Foot Plate Assembly WASHER, .250 Wide Heavy Flat Y Hydraulic Components CAP FUELCOMPONENTS/WIRING Harness Fuel Components Fuel COMPONENTS/WIRING HarnessConsole and Battery Assembly STRIP, Battery Insulator Foot PLATE/CONSOLE Components Foot Plate Components Deck Assembly WASHER, Blade Wheel and Strut ASSEMBLY/PUMP Components Wheel and Strut Assembly Spindle Assembly Spindle Assembly Decal Locations TCU51051

GSRKW2352S, GSRKA1952S specifications

The Great Dane GSRKA1952S and GSRKW2352S are robust, state-of-the-art vehicles engineered for efficiency and performance in the demanding environment of the transportation industry. Renowned for their cutting-edge design and advanced technologies, these models are poised to meet the needs of modern logistics operations.

Both the GSRKA1952S and GSRKW2352S are equipped with powerful engines that deliver exceptional horsepower and torque, ensuring they can handle heavy loads with ease. The GSRKA1952S features a diesel engine that emphasizes fuel efficiency while maintaining optimal performance levels. In contrast, the GSRKW2352S comes with an advanced hybrid powertrain that combines the benefits of electric and diesel power, significantly reducing emissions and fuel consumption without compromising power.

The chassis design of both models incorporates high-strength materials that enhance durability while reducing overall weight, contributing to improved fuel efficiency and handling. The suspension systems are finely tuned, offering superior ride quality and stability, which is particularly beneficial when navigating uneven road surfaces common in freight transport.

Safety is a paramount concern with the Great Dane GSRKA1952S and GSRKW2352S. Both models come with an array of safety features, including advanced braking systems, collision avoidance technology, and enhanced visibility through strategically placed lighting and mirrors. The driver’s cabin is ergonomically designed, offering comfort and convenience, with intuitive controls and a spacious layout that reduces fatigue during long hauls.

Payload capacity is another highlight of these models. With well-engineered features that maximize space and load distribution, both the GSRKA1952S and GSRKW2352S are ideal for transporting a wide variety of goods efficiently. They also incorporate technology that allows for easy tracking and monitoring of cargo, ensuring that deliveries are timely and secure.

The exterior design reflects a commitment to aerodynamics, significantly reducing drag and enhancing fuel efficiency at highway speeds. The innovative use of materials and engineering in these vehicles ensures they are not only efficient but also resilient against the rigors of daily use.

In summary, the Great Dane GSRKA1952S and GSRKW2352S stand out in the competitive world of transportation vehicles. With their blend of power, efficiency, safety features, and advanced technology, these models are perfect for businesses looking to optimize their logistics operations while minimizing their environmental impact. They exemplify the evolution of commercial vehicles, marrying tradition with innovation for a sustainable future in transportation.