Great Dane GSRKA1952S Using a Spark Arrestor, Rotating Blades are Dangerous, Checking Mowing Area

Page 6

SAFETY

Only operate in good light, keeping away from holes and hidden hazards.

Be sure all drives are in neutral and parking brake is engaged before starting engine. Only start engine from the operator’s position. Use seat belts if provided.

Slow down and use extra care on hillsides. Be sure to travel in the recommended direction on hillsides. For this machine, drive across hillsides, not up and down. Turf conditions can affect the machine’s stability. Use caution while operating near drop-offs.

Slow down and use caution when making turns and when changing directions on slopes.

Never raise deck with the blades running.

Never operate with the PTO shield, or other guards, not securely in place. Be sure all interlocks are attached, adjusted properly, and functioning properly.

Never operate with the discharge deflector raised, removed or altered, unless using a grasscatcher. Do not operate mower without discharge chute or entire grasscatcher in place.

Do not change the engine governor setting or overspeed the engine. Operating the engine at excessive speed can increase the hazard of personal injury.

Stop on level ground, lower implements, disengage drives, engage parking brake, and shut off engine before leaving the operator’s position for any reason including emptying the grasscatchers or unclogging the chute.

Stop equipment and inspect blades after striking objects or if an abnormal vibration occurs. Make necessary repairs before resuming operations.

Keep hands and feet away from the cutting units.

Look behind and down before backing up to be sure of a clear path.

Never carry passengers and keep pets and bystanders away.

Slow down and use caution when making turns and crossing roads and sidewalks. Stop blades if not mowing. Watch for traffic when operating near or crossing roadways.

Be aware of the mower discharge direction and do not point it at anyone.

Do not operate the machine while under the influence of alcohol or drugs.

Use care when loading or unloading the machine into or off of a trailer or truck.

Use care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

Inspect machine before you operate. Be sure hardware is tight. Repair or replace damaged, badly worn, or missing parts. Be sure guards and shields are in good condition and fastened in place. Make any necessary adjustments before you operate.

Before using, always visually inspect to see that the blades, blade bolts and the mower assembly are not worn and damaged. Replace worn and damaged blades and bolts in sets to preserve balance.

Keep safety labels visible when installing accessories and attachments.

Do not wear radio or music headphones. Safe service and operation require your full attention.

When machine is left unattended, stored, or parked, lower the mower deck unless a positive mechanical lock is used.

Using a Spark Arrestor

The engine in this machine is not equipped with a spark arrestor muffler. It is a violation of California Public Resource Code Section 4442 to use or operate this engine on or near any forest-covered, brush-covered or grass-covered land unless the exhaust system is equipped with a spark arrestor meeting any applicable local or state laws. Other states or federal areas may have similar laws.

A spark arrestor for your machine may be available from your authorized dealer. An installed spark arrestor must be maintained in good working order by the operator.

Checking Mowing Area

Evaluate the terrain to determine what accessories and attachments are needed to properly and safely perform the job.

Clear mowing area of objects that might be thrown. Keep people and pets out of mowing area.

Study mowing area. Set up a safe mowing pattern. Do not mow where traction or stability is doubtful.

Test drive area with mower lowered but not running. Slow down when you travel over rough ground.

Parking Safely

1.Stop machine on a level surface, not on a slope.

2.Disengage mower blades.

3.Lock the park brake.

4.Stop the engine.

5.Remove the key.

6.Wait for engine and all moving parts to stop before you leave the operator’s station.

7.Close fuel shut-off valve, if your machine is equipped.

8.Disconnect the negative battery cable or remove the spark plug wire (for gasoline engines) before servicing the machine.

Rotating Blades are Dangerous

HELP PREVENT SERIOUS OR FATAL ACCIDENTS:

Rotating blades can cut off arms and legs, and throw objects. Failure to observe safety instructions could result in serious injury or death.

Keep hands, feet and clothing away from mower deck when engine is running.

Be alert at all times, drive forward carefully. People, especially children can move quickly into the mowing area before you know it.

Safety - 4

Image 6
Contents OPERATOR’S Manual Page Special Messages Product IdentificationIntroduction Record Identification NumbersSafety Labels Understanding The Machine Safety LabelsSafety Labels Safety SafetyChecking Mowing Area Using a Spark ArrestorRotating Blades are Dangerous Parking SafelyKeep Riders Off Protect ChildrenAvoid Tipping Avoid High Pressure FluidsPrevent Fires Maintenance and StorageTire Safety Handling Fuel SafelyOperator Station Controls OperatingAvoid Damage to Plastic and Painted Surfaces Miscellaneous ControlsMounting and Dismounting Machine Safely Adjusting Cutting HeightSetting Cutting Height Raising and Lowering Thigh PadTesting Park Brake Switch Testing Safety SystemsTesting PTO Switch Testing Neutral Switch StartUsing the PTO Testing the Park BrakeUsing Park Brake Testing Neutral Switch RunUsing the Motion Control Levers Using the ThrottleUsing the Hourmeter ForwardGentle Right Turn ReverseGentle Left Turn Sharp Left TurnEngaging Mower Using Pump Free-Wheel ValvesStarting Engine Stopping the EngineMowing Travel Speeds Transporting Machine on a TrailerMowing Tips Dismounting to Inspect MowerService Lubrication Service IntervalsService Intervals Lubricating Pump Idler PivotService Engine Cleaning Engine Air Intake Screen and Fan Replacing Fuel Filter Service TransmissionService Transmission Hydraulic OilCleaning Hydraulic Oil Pump Cooling Fins Changing Hydraulic Oil and FilterRemoving Traction Drive Belt Installing Traction Drive BeltChecking and Replacing Pump Traction Drive Belt Checking Traction Drive BeltChecking Motion Control Linkages Checking and Adjusting Motion Control LinkagesAdjusting Motion Control Return to Neutral RTN Linkages Picture Note Side frame removed for picture clarityChecking and Adjusting Transmission Tracking Adjusting Forward and Reverse SpeedsAdjust Neutral Switch Service Steering & Brakes Service Steering & BrakesService Mower Service Mower Replacing Mower Deck Drive BeltChecking for Bent Mower Blades Checking and Replacing Mower Blades Sharpening BladesReplacing Mower Blades Service Electrical Service ElectricalCleaning Battery and Terminals Using Booster BatteryInstalling Booster Battery Disabled Vehicle BatteryService Miscellaneous Service MiscellaneousRemoving and Installing Front Caster Wheels Tightening Rear Drive Wheel HardwareChecking Tire Pressure Troubleshooting TroubleshootingEngine Electrical SystemCheck Machine Park BrakeSteering Storage StorageRemoving Machine From Storage AssemblyAssembly Check Hydraulic Oil LevelSpecifications SpecificationsGetting Quality Service Getting Quality Service Part NumbersPart Number Wiring Schematics Service Miscellaneous Hydraulic Schematics Service Miscellaneous Main Frame Assembly QTY Description FUEL, Hydraulic and Handle Assembly Swivel Adjuster ENGINE, Hydraulic and Mainframe Assembly CLAMP, Hose 1/2 Pinch CLUTCH, Pump Components and Foot Plate Assembly WASHER, .250 Wide Heavy Flat Y Hydraulic Components CAP FUELCOMPONENTS/WIRING Harness Fuel COMPONENTS/WIRING Harness Fuel ComponentsConsole and Battery Assembly STRIP, Battery Insulator Foot PLATE/CONSOLE Components Foot Plate Components Deck Assembly WASHER, Blade Wheel and Strut ASSEMBLY/PUMP Components Wheel and Strut Assembly Spindle Assembly Spindle Assembly Decal Locations TCU51051

GSRKW2352S, GSRKA1952S specifications

The Great Dane GSRKA1952S and GSRKW2352S are robust, state-of-the-art vehicles engineered for efficiency and performance in the demanding environment of the transportation industry. Renowned for their cutting-edge design and advanced technologies, these models are poised to meet the needs of modern logistics operations.

Both the GSRKA1952S and GSRKW2352S are equipped with powerful engines that deliver exceptional horsepower and torque, ensuring they can handle heavy loads with ease. The GSRKA1952S features a diesel engine that emphasizes fuel efficiency while maintaining optimal performance levels. In contrast, the GSRKW2352S comes with an advanced hybrid powertrain that combines the benefits of electric and diesel power, significantly reducing emissions and fuel consumption without compromising power.

The chassis design of both models incorporates high-strength materials that enhance durability while reducing overall weight, contributing to improved fuel efficiency and handling. The suspension systems are finely tuned, offering superior ride quality and stability, which is particularly beneficial when navigating uneven road surfaces common in freight transport.

Safety is a paramount concern with the Great Dane GSRKA1952S and GSRKW2352S. Both models come with an array of safety features, including advanced braking systems, collision avoidance technology, and enhanced visibility through strategically placed lighting and mirrors. The driver’s cabin is ergonomically designed, offering comfort and convenience, with intuitive controls and a spacious layout that reduces fatigue during long hauls.

Payload capacity is another highlight of these models. With well-engineered features that maximize space and load distribution, both the GSRKA1952S and GSRKW2352S are ideal for transporting a wide variety of goods efficiently. They also incorporate technology that allows for easy tracking and monitoring of cargo, ensuring that deliveries are timely and secure.

The exterior design reflects a commitment to aerodynamics, significantly reducing drag and enhancing fuel efficiency at highway speeds. The innovative use of materials and engineering in these vehicles ensures they are not only efficient but also resilient against the rigors of daily use.

In summary, the Great Dane GSRKA1952S and GSRKW2352S stand out in the competitive world of transportation vehicles. With their blend of power, efficiency, safety features, and advanced technology, these models are perfect for businesses looking to optimize their logistics operations while minimizing their environmental impact. They exemplify the evolution of commercial vehicles, marrying tradition with innovation for a sustainable future in transportation.