Great Dane GDRZ61-25KHE, GDRZ72-27KHE manual Keep Riders Off, Avoid Tipping, Checking Wheel Bolts

Page 10

 

 

SAFETY

 

 

 

 

PROTECT CHILDREN:

 

• Transport machine with decks lowered to improve

 

 

 

stability.

 

 

 

• Drive machine very slowly and avoid quick stops when

 

 

 

attachment is removed.

 

 

 

• Drive across a hill, not up and down. Be careful when

 

 

 

you change direction on a slope. If necessary, turn slowly

 

 

 

and in the downhill direction.

 

 

 

• Mowing when grass is wet can cause reduced traction

 

 

 

and sliding.

 

 

 

Keep Riders Off

 

 

 

 

•Never assume that children will remain where you last saw them. Children are attracted to mowing activity, stay alert to the presence of children.

•Keep children indoors when you are mowing. Turn the machine off if a child enters the mowing area.

•Use extra care when you come to blind corners, shrubs, trees, or other objects that may block your vision.

•Do not let children or an untrained person operate the machine.

•Do not carry or let children ride on any attachment or machine even with the blades off. Do not tow children in a cart or trailer.

Avoid Tipping

MIF

•Slopes are a major factor related to loss-of-control and tip-over accidents, which can result in severe injury or death.

•Do not drive where machine could slip or tip.

•Stay alert for holes and other hidden hazards in the terrain.

•Keep away from drop-offs, ditches, and embankments.

•Slow down before you make a sharp turn or operate on a slope.

MIF

•Only allow the operator on the machine. Keep riders off.

•Riders on the machine or attachment may be struck by foreign objects or thrown off the machine causing serious injury.

•Riders obstruct the operator’s view resulting in the machine being operated in an unsafe manner.

Checking Wheel Bolts

•A serious accident could occur causing serious injury if wheel bolts are not tight.

•Check wheel bolt tightness often during the first 100 hours of operation.

•Wheel hardware must be tightened to specified torque using the proper procedure anytime it is loosened.

Safety - 6

Page 9 Page 11
Image 10
Page 9 Page 11
Contents OPERATOR’S Manual Introduction Using Your Operator’s ManualSpecial Messages Product Identification Record Identification NumbersTable of Contents Safety Understanding The Machine Safety LabelsM131748, MX15340 Certification Emission Control System Certification LabelEmission Compliance Period Canadian Electromagnetic Compatibility EMC ComplianceOperator Training Required Operating SafelyParking Safely Using a Spark ArrestorChecking Mowing Area Rotating Blades are DangerousAvoid Tipping Keep Riders OffChecking Wheel Bolts Wear Appropriate Clothing Practice Safe MaintenanceDriving Safely on Public Roads Avoid High-Pressure Fluids Tire SafetyPrevent Fires Handling Waste Products and Chemicals Handling Fuel SafelyFuel and fuel vapors are highly flammable Operating Daily Operating ChecklistTesting Safety Systems Operator Station ControlsTesting Neutral Start Switch Testing PTO SwitchTesting Park Brake Switch Testing Seat SwitchMounting and Dismounting Machine Safely Adjusting SeatAdjusting Mower Deck Cutting Height Raising and Lowering Operator SeatAdjusting Mower Deck Anti-Scalp Wheels Using the Park BrakeUnlocking Park Brake Using the Key SwitchUsing the PTO Engage PTOUsing the Choke Carbureted Engines Only Using the Throttle LeverUsing the Hourmeter Using the Motion Control LeversNeutral Lock Position Optional Over the Lap Levers Gentle Left Turn Forward Gentle Right TurnReverse Sharp Left TurnStarting the Engine Engaging Mower Stopping the EngineMowing Tips Using Hydraulic Pump Free-Wheel ValvesTransporting Machine Picture Note Left pump shownDismounting to Inspect Mower Mowing Travel SpeedsAvoid Damage to Plastic and Painted Surfaces Parts Replacement PartsPart Numbers Service Intervals Spray Lubricant Service LubricationGrease Lubrication PointsPicture Note 48-, 52- and 61-inch mower decks Picture Note 72-inch mower deckService Engine Cleaning Engine Oil Cooler Kohler Engines Checking and Cleaning Air Filter ElementsCleaning Engine Air Intake Screen and Fan Oil Capacity With Filter DryReplacing Fuel Filter Fuel Injected Engines Checking Spark Plug Adjusting Carburetor Carbureted EnginesReplacing Fuel Filter Carbureted Engines Picture Note Kawasaki engine shownTroubleshooting the Kohler Electronic Fuel Injection System Priming Fuel Injectors Fuel Injected EnginesService Engine Checking Hydraulic Oil Level Service TransmissionHydraulic Oil Changing Hydraulic Oil and FilterRemoving and Installing Traction Drive Belt Cleaning Hydraulic Pump Cooling FinsNeutral Creep Adjustment Checking and Adjusting Motion Control LinkagesCheck Maximum Speed Drift Maximum Speed Drift Adjustment Hydraulic System Hose Routing Hydraulic System Schematic Cooling OrificeServicing Front Caster Wheel Roller Bearings Chariot Service Steering & BrakesRemove and Install Front Caster Wheels Servicing Front Caster Wheel Roller Bearings Chariot LXAdjusting Front Caster Spindle Bearing Servicing Caster Spindle BearingsHeight Adjustment Procedure Check AlignmentAdjusting Park Brake Alignment ProcedureRemoving and Installing Mower Deck Foot Plate Service MowerRemoving and Installing Mower Deck Belt Shields Checking Level Side-to-Side Adjusting Level Side-to-SideLeveling Mower Deck Picture Note Discharge chute raised for photo clarityChecking and Adjusting Cutting Height Adjust Thrust Arm-to-Stop Rod Clearance Transport PositionAdjust Assist Spring Tension Adjusting Deck Lift Assist Spring TensionCheck Spring Tension MX15328 MX15318 Checking and Replacing Mower Blades Balancing Blades Sharpening BladesReplacing Mower Blades Replacing Mower Spindle Bearings 72-Inch Mower Deck Service Mower Removing and Installing the Battery Service ElectricalCleaning Battery and Terminals Replacing Fuse Carbureted Engines Using Booster BatteryBooster Battery Disabled Vehicle Battery Replacing Fuses Fuel Injected EnginesBurnishing the PTO Clutch Wiring Schematic Carbureted Engines Wiring Schematic 26 HP Fuel Injected Engine Wiring Schematic 28 HP Fuel Injected Engine Checking Tire Pressure Service MiscellaneousFilling Fuel Tank Tire Size PressureRemove and Install Rear Drive Wheels Cleaning and Repairing Metal SurfacesUsing Troubleshooting Chart TroubleshootingCheck Troubleshooting Electrical System Park Brake MachineSteering Mower Deck Preparing Machine for Storage Storing SafetyStorage Preparing Fuel and Engine for StorageAssembly Check Safety System Install Motion Control LeversInstall Seat Lubricate MachineInitial Adjustments Specifications Height Adjustment Increments mm 1/2 Belt Shields, Removing and Installing Mower Deck IndexSpindle Bearings, Replace, 48-, 52- and 61-In. Decks Service Record GD Record Service Dates

GDRZ48-19KAE, GDRZ61-25KHE, GDRZ61-27KHE, GDRZ48-17KAE, GDRZ72-28KHE specifications

The Great Dane GDRZ series, including models GDRZ72-27KHE, GDRZ61-25KAE, GDRZ61-28KHE, GDRZ61-26KHE, and GDRZ52-25KHE, stands out as a robust line of refrigerated trailers designed for the rigorous demands of commercial transport and logistics. These models embody a perfect fusion of innovative technologies, exceptional performance, and high durability, catering specifically to the needs of operators in the freight industry.

One of the most notable features of the GDRZ series is its advanced insulation technology, which significantly enhances temperature retention. This is vital for businesses that rely on the transport of perishable products, ensuring that goods remain fresh throughout the journey. The GDRZ trailers utilize high-density foam insulation, providing superior thermal performance while minimizing energy costs.

In terms of structural integrity, the GDRZ series is built with a sturdy composite construction that enhances durability while reducing overall weight. This lightweight design contributes to improved fuel efficiency, allowing operators to maximize their payload without compromising on safety or performance. Moreover, these trailers are equipped with corrosion-resistant materials, extending their lifespan and reducing maintenance costs.

The cooling systems in the GDRZ models are engineered for optimal performance. High-efficiency refrigeration units with digital thermostatic controls ensure that temperature settings are maintained accurately and can be adjusted easily. This technology enables users to monitor and record temperature data, facilitating compliance with industry regulations and providing peace of mind regarding cargo safety.

Another highlight of the GDRZ series is its user-friendly features. The ergonomic design of the interior allows for easy access to cargo, while the integrated lighting solutions facilitate loading and unloading in low-visibility conditions. The models also feature reinforced tie-down points that secure cargo effectively, reducing the risk of movement and damage during transit.

Safety is a key consideration across the GDRZ line, with advanced braking systems and reflective markings enhancing visibility and control on the road. Additional safety features may include optional GPS tracking systems, allowing operators to monitor the whereabouts of their trailers in real time, ensuring timely deliveries and improved fleet management.

In summary, the Great Dane GDRZ series, with its various models, represents a significant advancement in refrigerated transport technology. Combining energy efficiency, durability, and user-centric design, these trailers are ideal for businesses seeking reliable solutions for their refrigerated transport needs. With a commitment to quality and innovation, Great Dane continues to set industry standards for excellence in trailer manufacturing.
Top Page Image Contents