Storage, Storing Safety | Great Dane GDRZ48-17KAE, GDRZ72-27KHE

STORAGE

Storing Safety

c CAUTION: Avoid injury! Fuel vapors are explosive and flammable. Engine exhaust fumes contain carbon monoxide and can cause serious illness or death:

•Run the engine only long enough to move the machine to or from storage.

•Do not store vehicle with fuel in the tank inside a building where fumes may reach an open flame or spark.

•Allow the engine to cool before storing the machine in any enclosure.

Preparing Machine for Storage

1.Repair any worn or damaged parts. Replace parts if necessary. Tighten loose hardware.

2.Repair scratched or chipped metal surfaces to prevent rust.

3.Clean under the deck and remove grass and debris from inside chute.

4.Wash the machine and apply wax to metal surfaces.

5.Run machine for five minutes to dry belts and pulleys.

6.Apply light coat of engine oil to pivot and wear points to prevent rust.

Preparing Fuel and Engine for Storage

Fuel:

If you have been using “Stabilized Fuel”, add stabilized fuel to tank until the tank is full.

NOTE: Filling the fuel tank reduces the amount of air in the fuel tank and helps reduce deterioration of fuel.

If you are not using “Stabilized Fuel”:

1. Park machine safely in a well-ventilated area.

NOTE: Try to anticipate the last time the machine will be used for the season so very little fuel is left in the fuel tank.

2.Turn on engine and allow to run until it runs out of fuel.

3.Turn key to off position.

4.Mix fresh fuel and fuel stabilizer in separate container. Follow stabilizer instructions for mixing.

5.Fill fuel tank with stabilized fuel.

6.Run engine for a few minutes to allow fuel mixture to circulate through fuel system.

Engine:

Engine storage procedure should be used when vehicle is not to be used for longer than 60 days.

1.Change engine oil and filter while engine is warm.

2.Service air filter if necessary.

3.Clean debris from engine air intake screen.

4.Remove spark plugs. Put 30 mL (1 oz.) of clean engine oil in cylinders.

5.Crank the engine five or six times to allow oil to be distributed.

6.Install spark plugs.

7.Clean the engine and engine compartment.

8.Remove battery.

9.Clean the battery and battery posts.

10.Store the battery in a cool, dry place where it will not freeze.

NOTE: The stored battery should be recharged every 90 days.

11.Charge the battery.

12.Store the machine in a dry, protected place. If machine is stored outside, put a waterproof cover over it.

Removing Machine From Storage

1.Check tire pressure.

2.Check engine oil level.

3.Charge battery if necessary.

4.Install battery.

5.Check spark plug gap. Install and tighten plugs to specified torque.

6.Lubricate all grease points.

7.Run the engine 5 minutes without the mower or any attachments running to allow oil to be distributed throughout engine.

8.Be sure all shields and guards or deflectors are in place.

Storage - 64

GDRZ48-19KAE, GDRZ61-25KHE, GDRZ61-27KHE, GDRZ48-17KAE, GDRZ72-28KHE specifications

The Great Dane GDRZ series, including models GDRZ72-27KHE, GDRZ61-25KAE, GDRZ61-28KHE, GDRZ61-26KHE, and GDRZ52-25KHE, stands out as a robust line of refrigerated trailers designed for the rigorous demands of commercial transport and logistics. These models embody a perfect fusion of innovative technologies, exceptional performance, and high durability, catering specifically to the needs of operators in the freight industry.

One of the most notable features of the GDRZ series is its advanced insulation technology, which significantly enhances temperature retention. This is vital for businesses that rely on the transport of perishable products, ensuring that goods remain fresh throughout the journey. The GDRZ trailers utilize high-density foam insulation, providing superior thermal performance while minimizing energy costs.

In terms of structural integrity, the GDRZ series is built with a sturdy composite construction that enhances durability while reducing overall weight. This lightweight design contributes to improved fuel efficiency, allowing operators to maximize their payload without compromising on safety or performance. Moreover, these trailers are equipped with corrosion-resistant materials, extending their lifespan and reducing maintenance costs.

The cooling systems in the GDRZ models are engineered for optimal performance. High-efficiency refrigeration units with digital thermostatic controls ensure that temperature settings are maintained accurately and can be adjusted easily. This technology enables users to monitor and record temperature data, facilitating compliance with industry regulations and providing peace of mind regarding cargo safety.

Another highlight of the GDRZ series is its user-friendly features. The ergonomic design of the interior allows for easy access to cargo, while the integrated lighting solutions facilitate loading and unloading in low-visibility conditions. The models also feature reinforced tie-down points that secure cargo effectively, reducing the risk of movement and damage during transit.

Safety is a key consideration across the GDRZ line, with advanced braking systems and reflective markings enhancing visibility and control on the road. Additional safety features may include optional GPS tracking systems, allowing operators to monitor the whereabouts of their trailers in real time, ensuring timely deliveries and improved fleet management.

In summary, the Great Dane GDRZ series, with its various models, represents a significant advancement in refrigerated transport technology. Combining energy efficiency, durability, and user-centric design, these trailers are ideal for businesses seeking reliable solutions for their refrigerated transport needs. With a commitment to quality and innovation, Great Dane continues to set industry standards for excellence in trailer manufacturing.