Grizzly 52 manual Bikon Torque Values

MAINTENANCE

(TABLE 1)

BIKON TORQUE VALUES

Dry Bolt	375 ft/lb
w/ Red Locktite Appplied	282 ft/lb

FIGURE 1

BIKON TORQUING SEQUENCE

PROPER TORQUE FOR FASTENERS

The chart lists the correct tightening torque for fasteners. When bolts are to be tightened or replaced, refer to this chart to determine the grade of bolts and the proper torque except when specific torque values are assigned in manual text.

RECOMMENDED TORQUE IN FOOT POUNDS UNLESS OTHERWISE STATED IN THE MANUAL*

NOTE: These values apply to fasteners as received from supplier, dry or when lubricated with normal engine oil. They do not apply if special graphited or molydisulphide greases or other extreme pressure lubricants are used. This applies to both UNF fine and UNC coarse threads.

(TABLE 2)

*

GRIZZLY 52 01/05 Maintenance Section 5-5

© 2005 Alamo Group Inc.