Grizzly 52 manual To the OWNER/OPERATOR/DEALER, Required of the Owner

Page 49

TO THE OWNER/OPERATOR/DEALER

To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions and the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily find the information you need.

The OCCUPATIONAL SAFETY AND HEALTH ACT (1928.51 Subpart C) makes these minimum safety requirements of tractor operators:

REQUIRED OF THE OWNER:

1.Provide a Roll-Over-Protective Structure that meets the requirements of this Standard; and 2.Provide Seatbelts that meet the requirements of this paragraph of this Standard and SAE J4C; and 3.Ensure that each employee uses such Seatbelt while the tractor is moving; and

4.Ensure that each employee tightens the Seatbelt sufficiently to confine the employee to the protected area provided by the ROPS.

REQUIRED OF THE OPERATOR

1.Securely fasten seatbelt if the tractor has a ROPS.

2.Where possible, avoid operating the tractor near ditches, embankments, and holes. 3.Reduce speed when turning, crossing slopes, and on rough, slick, or muddy surfaces. 4.Stay off slopes too steep for safe operation.

5.Watch where you are going - especially at row ends, on roads, and around trees. 6.Do not permit others to ride.

7.Operate the tractor smoothly - no jerky turns, starts, or stops.

8.Hitch only to the drawbar and hitch points recommended by the tractor manufacturer. 9. When the tractor is stopped, set brakes securely and use park lock, if available.

Keep children away from danger all day, every day...

Equip tractors with rollover protection (ROPS) and keep all

machinery guards in place...

Please work, drive, play and live each day with care and concern for your safety and that of your family and fellow citizens.

Image 49
Contents Grizzly To the OWNER/OPERATOR/DEALER Safety Training Makes the Difference Page Table of Contents Page Safety Section Safety ¡LEA EL Instructivo Do not mount the Tractor while the tractor is Following rules Safety SGM-10 Parts Information Wait a minute...Save a lifeWork Area Preparation Safety Safety Safety QTY Description Decal Location Decals Not Shown Safety Safety Safety Federal Laws and Regulations Introduction Section Introduction Safety First Page Assembly Section PRE-INSTALLATION AssemblyHydraulic Schematic Alternate Hydraulic Schematic Assembly Page Operation Section Pre-Startup OperationCheck LubricateStart Up Two Blade Arm, Three Blade Disc & Disc w/ Cutter BitsTwo Blade Arm w/ Blades Three Blade Rotary Disc Disc w/ Cutter BitsNormal Operation Maintenance Section General Maintenance MaintenanceDisassembly Series II Model AssemblyBikon Hub Bikon Torque Values Motor Mounting Plate Installation & Removal of Locking AssemblyBlade Arm Blade BoltsMaintenance Removal General InstructionsGrizzly 52 01/05 Maintenance Section Alamo Industrial Required of the Owner To the OWNER/OPERATOR/DEALERGrizzly 52 01/05 02975192C Printed U.S.A