Grizzly G1024 instruction manual Fence Assembly

Page 12

B. FENCE ASSEMBLY

The Model G1024 Shaper comes with a two-piece adjustable fence. Before attaching the fence unit to the shaper table, you will want to “wood” it. The wood fence pieces included with the Model G1024 are pre-drilled and counterbored to allow the slotted mounting screws to rest below the wood surface once they are tightened.

Most woodworkers like to replace the wood pieces on the fence with wider and thicker boards. This gives the user greater stability and a larger bearing surface. The following procedure will ensure that the fence is parallel with itself and square with the table.

1.Ensure that the bolts on each side are tight and adequately countersunk.

2.To align the wood fences, adjust one or both fence halves so they are in close alignment. Micro- adjust and check the alignment with a good straight edge.

3.If the boards are not co-planar with each other, resurface the wooden fences as one unit. You can perform this operation on a jointer. See Figure 6.

Figure 6

CAUTION: Make sure the bolt holes are countersunk deep enough so jointer knives will not come in contact with the heads of the bolts. Check the jointer fence and bed for square. Run the shaper fence through the jointer until both sides are co-planar. Check your work with your high-quality straight edge. Remember: If the jointer is not set up properly, the results will be unsatisfactory. This procedure can be continued as long as there is enough wood left for the jointer knives to clear the bolt heads.

Once you are satisfied that the fence is co-planar, mount the fence assembly on the shaper table. The mounting studs are already attached to the table. All you will need to do is remove the wing nuts, place the fence assembly on the studs and re-tighten the nuts.

- 10 -

Image 12
Contents IMPORTS, INC H.P. Shaper Model G1024Table of Contents Introduction III. Safety Rules for ALL Tools Keep Guards in Place and in working orderPage IV. Unpacking Piece Inventory VI. CLEAN-UP Before Assembly VII. Site PlanningFloor Load Working ClearancesVIII. Electrical Service Requirements GroundingIX. Assembly StandStand Fence Assembly Safety Guard Safety Procedures Wrong Page XI. Adjustment Section FenceImproper Fence Adjustment Spindle Spindle Elevation Cutter DirectionXII. RUB Collars HOW RUB Collars are UsedExamples Rub collar below the cutterRub collar above the cutter XIII. Shaping Pattern WorkStraight Stock Page Irregular Shaping Rotation of the CutterPage Page XIV. Equipment Maintenance Belt MaintenanceXV. Closure LubricationXVI. Machine Data Grizzly Model G1024 3/4 H.P. ShaperXVII. Warranty and Returns Limited WarrantyXVIII. Parts Lists and Diagrams Main Body AssemblyModel G1024 Shaper Parts List PB02MPR23M XIX. Using the Model G1793 Router BIT Spindle

G1024 specifications

The Grizzly G1024 is a powerful and versatile table saw that has earned a reputation among woodworkers for its reliability and precision. Designed for both amateur and professional use, it combines advanced technologies with user-friendly features, ensuring that it meets the demands of various woodworking projects.

One of the standout features of the G1024 is its robust 1 HP motor. This motor delivers substantial power for cutting through various materials such as hardwood, softwood, and composite materials with ease. The saw is equipped with a 10-inch blade, which is standard in the industry and allows for a wide range of cuts, from rip cuts to crosscuts. The G1024 also supports a maximum cutting depth of 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees, making it versatile for different angles and thicknesses.

The G1024 incorporates a precision-ground cast-iron table, which provides stability and minimizes vibration during operation. The flat surface of the table ensures accurate cuts and is easy to maintain. The table size allows for extensive workpieces, with a generous extension table available for larger projects. In addition, the integrated T-slot miter gauge permits smooth movement of the gauge for precise angle cuts.

Safety is a priority in the design of the G1024. It comes with a blade guard that ensures protection against accidental contact with the spinning blade. The push stick and anti-kickback pawls further enhance user safety, allowing woodworkers to handle materials confidently without the fear of injury.

Another notable feature of the Grizzly G1024 is its fence system. The saw includes a reliable rip fence that locks securely in place, ensuring straight and accurate cuts every time. The fence’s easy adjustment mechanism allows for quick changes in width, making it an efficient tool for varying projects.

Overall, the Grizzly G1024 is designed to cater to woodworkers' needs, thanks to its blend of power, precision, and safety. Its advanced features make it suitable for a wide range of woodworking tasks, while its build quality ensures durability. Whether crafting furniture, cabinetry, or other wood projects, the G1024 stands as a dependable saw that enhances productivity and creativity in the workshop.