Grizzly G1024 instruction manual Spindle

Page 19

Outfeed Fence

Cutter Rotation

Workpiece

Infeed Fence

 

TT

 

 

 

 

 

 

U

E

 

 

 

C

 

R

 

 

 

 

 

 

 

Feed Direction

Figure 13

Take your time when adjusting the fence. Always use a piece of scrap wood to make a first run sam- ple. Micro-adjust accordingly. Double check yourself to make sure all hold-down devices are secure. Remember to use appropriate guards when using the fence system.

B. SPINDLE

The standard 1/2" spindle on your Model G1024 Shaper is capable of using most available 1/2" cut- ters with maximum diameters of 27/8" and 23/8" maximum height. To install a cutter on your shaper:

1.Remove the spindle nut and safety washer from the spindle shaft. Some Model G1024 Shapers may feature a lock nut instead of a safety washer.

2.Select the proper shaper cutter for the application you desire and place it on the spindle. Make sure the cutter’s direction of rotation is correct for your application.

3.Once the cutter is properly seated on the spindle shaft, replace the safety washer, making sure that it aligns properly with the notch in the spindle shaft.

4.Return the spindle nut to its position on the spindle shaft and tighten it. Use an appropriate wrench on the squared head of the spindle shaft to hold the shaft in place while you tighten the spindle nut. See Figure 14. If your shaper features a lock nut, tighten it over the spindle nut.

Figure 14

- 17 -

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Model G1024 IMPORTS, INC H.P. ShaperTable of Contents Introduction Keep Guards in Place and in working order III. Safety Rules for ALL ToolsPage IV. Unpacking Piece Inventory Working Clearances VI. CLEAN-UP Before AssemblyVII. Site Planning Floor LoadGrounding VIII. Electrical Service RequirementsStand IX. AssemblyStand Fence Assembly Safety Guard Safety Procedures Wrong Page Fence XI. Adjustment SectionImproper Fence Adjustment Spindle Cutter Direction Spindle ElevationHOW RUB Collars are Used XII. RUB CollarsRub collar below the cutter ExamplesRub collar above the cutter Pattern Work XIII. ShapingStraight Stock Page Rotation of the Cutter Irregular ShapingPage Page Lubrication XIV. Equipment MaintenanceBelt Maintenance XV. ClosureGrizzly Model G1024 3/4 H.P. Shaper XVI. Machine DataLimited Warranty XVII. Warranty and ReturnsMain Body Assembly XVIII. Parts Lists and DiagramsPB02M Model G1024 Shaper Parts ListPR23M XIX. Using the Model G1793 Router BIT Spindle

G1024 specifications

The Grizzly G1024 is a powerful and versatile table saw that has earned a reputation among woodworkers for its reliability and precision. Designed for both amateur and professional use, it combines advanced technologies with user-friendly features, ensuring that it meets the demands of various woodworking projects.

One of the standout features of the G1024 is its robust 1 HP motor. This motor delivers substantial power for cutting through various materials such as hardwood, softwood, and composite materials with ease. The saw is equipped with a 10-inch blade, which is standard in the industry and allows for a wide range of cuts, from rip cuts to crosscuts. The G1024 also supports a maximum cutting depth of 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees, making it versatile for different angles and thicknesses.

The G1024 incorporates a precision-ground cast-iron table, which provides stability and minimizes vibration during operation. The flat surface of the table ensures accurate cuts and is easy to maintain. The table size allows for extensive workpieces, with a generous extension table available for larger projects. In addition, the integrated T-slot miter gauge permits smooth movement of the gauge for precise angle cuts.

Safety is a priority in the design of the G1024. It comes with a blade guard that ensures protection against accidental contact with the spinning blade. The push stick and anti-kickback pawls further enhance user safety, allowing woodworkers to handle materials confidently without the fear of injury.

Another notable feature of the Grizzly G1024 is its fence system. The saw includes a reliable rip fence that locks securely in place, ensuring straight and accurate cuts every time. The fence’s easy adjustment mechanism allows for quick changes in width, making it an efficient tool for varying projects.

Overall, the Grizzly G1024 is designed to cater to woodworkers' needs, thanks to its blend of power, precision, and safety. Its advanced features make it suitable for a wide range of woodworking tasks, while its build quality ensures durability. Whether crafting furniture, cabinetry, or other wood projects, the G1024 stands as a dependable saw that enhances productivity and creativity in the workshop.
Top Page Image Contents