Grizzly G1024 instruction manual

Page 16

20.STOCK CONDITION. The danger of experiencing kick-back is increased when the stock has knots, holes, or foreign objects in it. Warped stock should be run through a jointer before attempting to run it through a shaper.

21.MISUSE. Do not use the Model G1024 for anything other than its intended purpose. If used for other purposes, Grizzly disclaims any real or implied warranty and is not responsible for any damage or injury which may result from that use.

22.USE the correct safety guards.

23.MAKE sure that fences, guides, or guards are mounted securely.

24.ALWAYS USE jigs, fixtures, or templates whenever possible.

25.KEEP ANY unused portion of the cutter below the table surface.

26.NEVER attempt to take too much material off in one pass.

27.WHEN SHAPING CONTOURED WORK and using a rub collar, NEVER start out at a corner. See the rub collar section further on in the manual.

28.KEEP all cutting surfaces sharp.

29.BE SURE THE SPINDLE turns freely and all adjustment tools, etc., are off of the table before the machine is turned on.

NOTE: Many manuals and books recommend the use of push sticks. While in some applications they are useful safety devices, in others they can be quite dangerous. If the pushstick comes in con- tact with the cutter on the end grain, it can fly out of your hand like a bullet – potentially causing seri- ous injury. We recommend using, instead, some type of fixture, jig, or hold-down device as a safer alternative. This does not mean that we recommend using the machine without any safety protec- tion. Use a guard, or other type of protective device at all times. Grizzly carries a number of protec- tive devices for use with shapers. See the current catalog for details and ordering information.

30.THE SPINDLE must be adjusted correctly and locked in position before turning on the shaper.

31.AGAIN, IF THERE IS ANY ASPECT of this machine’s operation you do not understand, DO NOT try to operate the shaper.

REMEMBER: ALWAYS WEAR PROTECTIVE EYEWEAR AND CLOTHING WHEN USING THIS, OR ANY OTHER MACHINERY.

- 14 -

Page 15 Page 17
Image 16
Page 15 Page 17
Contents IMPORTS, INC H.P. Shaper Model G1024Table of Contents Introduction III. Safety Rules for ALL Tools Keep Guards in Place and in working orderPage IV. Unpacking Piece Inventory VI. CLEAN-UP Before Assembly VII. Site PlanningFloor Load Working ClearancesVIII. Electrical Service Requirements GroundingIX. Assembly StandStand Fence Assembly Safety Guard Safety Procedures Wrong Page XI. Adjustment Section FenceImproper Fence Adjustment Spindle Spindle Elevation Cutter DirectionXII. RUB Collars HOW RUB Collars are UsedExamples Rub collar below the cutterRub collar above the cutter Pattern Work XIII. ShapingStraight Stock Page Irregular Shaping Rotation of the CutterPage Page XIV. Equipment Maintenance Belt MaintenanceXV. Closure LubricationXVI. Machine Data Grizzly Model G1024 3/4 H.P. ShaperXVII. Warranty and Returns Limited WarrantyXVIII. Parts Lists and Diagrams Main Body AssemblyModel G1024 Shaper Parts List PB02MPR23M XIX. Using the Model G1793 Router BIT Spindle

G1024 specifications

The Grizzly G1024 is a powerful and versatile table saw that has earned a reputation among woodworkers for its reliability and precision. Designed for both amateur and professional use, it combines advanced technologies with user-friendly features, ensuring that it meets the demands of various woodworking projects.

One of the standout features of the G1024 is its robust 1 HP motor. This motor delivers substantial power for cutting through various materials such as hardwood, softwood, and composite materials with ease. The saw is equipped with a 10-inch blade, which is standard in the industry and allows for a wide range of cuts, from rip cuts to crosscuts. The G1024 also supports a maximum cutting depth of 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees, making it versatile for different angles and thicknesses.

The G1024 incorporates a precision-ground cast-iron table, which provides stability and minimizes vibration during operation. The flat surface of the table ensures accurate cuts and is easy to maintain. The table size allows for extensive workpieces, with a generous extension table available for larger projects. In addition, the integrated T-slot miter gauge permits smooth movement of the gauge for precise angle cuts.

Safety is a priority in the design of the G1024. It comes with a blade guard that ensures protection against accidental contact with the spinning blade. The push stick and anti-kickback pawls further enhance user safety, allowing woodworkers to handle materials confidently without the fear of injury.

Another notable feature of the Grizzly G1024 is its fence system. The saw includes a reliable rip fence that locks securely in place, ensuring straight and accurate cuts every time. The fence’s easy adjustment mechanism allows for quick changes in width, making it an efficient tool for varying projects.

Overall, the Grizzly G1024 is designed to cater to woodworkers' needs, thanks to its blend of power, precision, and safety. Its advanced features make it suitable for a wide range of woodworking tasks, while its build quality ensures durability. Whether crafting furniture, cabinetry, or other wood projects, the G1024 stands as a dependable saw that enhances productivity and creativity in the workshop.
Top Page Image Contents