H2939—4 Piece Edge Finder Set
Four different styles to cover any setup problem! Set includes one each: a 3⁄8" diameter with a point, a combination 3⁄8" diameter with a point and
a0.200" shoulder, a 1⁄2" diameter with a 0.200" shoulder, and a combination 1⁄2" diameter with a 0.200" shoulder and a 0.500" shoulder.
Figure 16. H2939 4-Pc. Edge Finder Set.
G9296—Adjustable Tailstock
For 8" and 10" Rotary Tables
G9297—Adjustable Tailstock
For 12" Rotary Tables
When used with your rotary table and mill, these adjustable tailstocks provide the support you need for those longer workpieces. Clamps to your mill table with standard clamping hardware and allows precise and accurate adjustments.
Figure 17. Adjustable Tailstock.
G9295—Dividing Plates
When used with your rotary table, these dividing plates provide a higher degree of precision in hole placement, spot facing, and even gear making.
Figure 18. G9295 Dividing Plates.
H8370—Power Feed for Mills
If you want to get the most out of your mill, you really need a power feed. This power feed comes with everything required to start milling with exact control. Comes supplied with a mounting bracket, gear,