Safety Instructions for Machinery

SECTION 1: SAFETY

For Your Own Safety, Read Instruction Manual Before Operating this Machine

The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures.

			Indicates an imminently hazardous situation which, if not avoided,

			WILL result in death or serious injury.
			Indicates a potentially hazardous situation which, if not avoided,

			COULD result in death or serious injury.
			COULD result in death or serious injury.
			Indicates a potentially hazardous situation which, if not avoided,

			MAY result in minor or moderate injury. It may also be used to alert

			against unsafe practices.
	NOTICE		This symbol is used to alert the user to useful information about
	NOTICE		proper operation of the machine.

1.READ THE ENTIRE MANUAL BEFORE STARTING MACHINERY. Machinery pres- ents serious injury hazards to untrained users.

2.ALWAYS USE ANSI APPROVED SAFETY GLASSES WHEN OPERATING MACHINERY. Everyday eyeglasses only have impact resistant lenses—they are NOT safety glasses.

3.ALWAYS WEAR A NIOSH APPROVED RESPIRATOR WHEN OPERATING MACHINERY THAT PRODUCES DUST. Most types of dust (wood, metal, etc.) can cause severe respiratory illnesses.

4.ALWAYS USE HEARING PROTECTION WHEN OPERATING MACHINERY. Machinery noise can cause permanent hearing loss.

5.WEAR PROPER APPAREL. DO NOT wear loose clothing, gloves, neckties, rings, or jewelry that can catch in moving parts. Wear protective hair covering to contain long hair and wear non-slip footwear.

6.NEVER OPERATE MACHINERY WHEN TIRED OR UNDER THE INFLUENCE OF DRUGS OR ALCOHOL. Be mentally alert at all times when running machinery.

-4-	G9298/G9299/G9300 Rotary Table