Marantz SR6001 manual Remote Control Operation, 9AUDIO IN/OUT TV, DVD, VCR, DSS, TAPE, CD/CDR

!9AUDIO IN/OUT (TV, DVD, VCR, DSS, TAPE, CD/CDR)

These are the analog audio inputs and outputs. There are 6 audio inputs and 3 audio outputs. The audio jacks are nominally labeled for cassette tape decks, compact disc players, DVD players and etc....

The audio inputs and outputs require RCA-type connectors.

@0DIGITAL INPUT (Dig.1 - 5) / OUTPUT (coaxial, optical)

These are the digital audio inputs and outputs. There are 2 digital inputs with coaxial jacks, 3 with optical jacks.

The inputs accept digital audio signals from a compact disc, LD, DVD, or other digital source component.

For digital output, there is 1 coaxial output and 1 optical output.

The digital outputs can be connected to MD recorders, CD recorders, DAT decks, or other similar components.

@1VIDEO IN/OUT (TV, DVD, VCR, DSS)

These are the video inputs and outputs. There are 4 video inputs and 1 video output and each one includes both composite video and S-video confi gurations. Connect VCRs, DVD players, and other video components to the video inputs.

The 1 video output channel can be used to connected to video tape recorders for making recordings.

@2HDMI INPUT / OUTPUT

This unit has 2 HDMI inputs and 1 HDMI output. The input function can be selected from the OSD menu system. (See page 19)

REMOTE CONTROL

OPERATION

FUNCTION AND OPERATION

The provided remote control unit is a universal remote controller. The POWER button, numeric buttons and control buttons are used in common across different input source components.

The input source controlled with the remote control unit changes when one of the input selector buttons is pressed.

					‹5
z		LEARN	SEND		⁄7
x	SOURCE	SET	OFF	ON	⁄8
c	l/				⁄9
	SLEEP	DISPLAY	P.DIRECT	SURROUND
v				LIP SYNC/	¤0
b					¤1
	AUTO		dts	BAND
				INPUT
n	1	2	3		¤2
	CS	EX/ES	VIRTUAL	T.MODE
	4	5	6		¤3
	M-CH ST	STEREO	NIGHT	P.SCAN
	7	8	9
		7.1CH IN	A/D	HT-EQ
m	CL	0	+10	MEMO	¤4
,	CH/ CAT	SPKR A/B	MUTE	VOLUME	¤5
.		MULTI/ CAT M-SPKR			¤6
⁄0					¤7
⁄1	INFO			MENU	¤8
		ENTER			¤9
	T.TONE
⁄2	/SET UP			EXIT	‹0
	REC	T.DISP	PTY	F.DIRECT
⁄3	- PRESET +		- TUNING +
⁄4					‹1
⁄5	DISC+	ANGLE	SUB TITLE	AUDIO	‹2
	CH-SEL	V-OFF	ATT.
⁄6	BASS		TREBLE		‹3
	TV	DVD	VCR	DSS
	TUNER	CD	CDR	MD	‹4
	TAPE	AUX1	AUX2	AMP

REMOTE CONTROLLER

RC5001SR

zLEARN indicator

Indicates when the remote controller is in the LEARN mode.

xSET button

This button is used to enter learn mode and preset mode.

c/ SOURCE ON/OFF button

This button is used to turn a specific source (such as a DVD player) on or off independently from the rest of the system.

vSLEEP button

This button is used for setting the sleep timer.

bDISPLAY button

Selects the display mode for the front display of the SR6001.

nNumeric buttons

These buttons are used to switch between 0 to +10 of the source components.

If the source is set to the amplifier, these buttons are used to perform operations.

(When AMP mode is selected)

1/AUTO button

Used to select auto surround.

2/Dolby button

Used to select DOLBY mode.

3/dts button

Used to select dts mode.

4/CSII button

Used to select CSII mode.

5/EX/ES button

Used to select EX/ES mode.

6/VIRTUAL button

Used to select VIRTUAL mode.

7/M-CH ST button

Used to select Multi Channel Stereo.

8/STEREO button

Used to select STEREO mode.

9/NIGHT button

Pressing this button prevents the Dolby Digital signal from playback at a loud voice. This function reduces the voice by 1/3 to 1/4 at maximum. Thus, it eliminates the occurrence of an abruptly loud voice at night. However, the function is valid only in the case when the Dolby Digital signal is entered into OPTICAL or COAXIAL and data to compress the voice exists in the signal to be played back.

When this button is pressed, the “NIGHT” indicator is illuminated.

0/7.1CH IN button

Press this button to select the output of an external multi channel decoder.

(+10) A/D button

Used to switch between the analog and digital inputs.

mCL (Clear) button

This button is used to erase the memory or program of a source.

,SPKR A/B button

Used to select the speaker system.

The speaker system is switched in the following sequence.

A → B → A+B → off

.CH/CAT3 (UP) / 4 (DOWN) buttons

These buttons are used to change channels.

⁄0 MULTI/CAT button

(When AMP mode is selected)

Used to turn on and off multi room.

⁄1 INFO button

(When AMP mode is selected)

When this button is pressed, the current setting are displayed on the TV monitor.

⁄2 T.TONE/SET UP button

(When AMP mode is selected)

Used to enter the test tone menu.

ENGLISH

9