Marantz SR6001 manual Surround Setup, Channel Level

3 SURROUND SETUP

This menu is for setting surround effect parameters for the various surround input signals so as to bring out the live audio effect of your speaker system.

• CHANNEL LEVEL:

“3-1 CHANNEL LEVEL” (see page 37)

• PLIIx MUSIC PARAMETER:

“3-2 PLIIx MUSIC PARAMETER” (see page 38)

• CSII PARAMETER:

3	. SURR	SETUP
CHANNEL LEVEL
PL x	MUSIC	PARAMETER
CS	PARAMETER
NEO:6	PARAMETER
HT - EQ		: OFF
LFE LEVEL		:
RETURN		NEXT EXIT

☞ P. 37 ☞ P. 38

3-1 CHANNEL LEVEL

1. Select “3. SURR SETUP” from MAIN MENU with 3 or 4 cursor buttons and press the ENTER button.

2. Select “CHANNEL LEVEL” with the 3 or 4 cursor buttons and press the ENTER button.

3. Set the SURR. MODE with the 1 or 2 cursor buttons.

ENGLISH

“3-3 CSII PARAMETER” (see page 38)

• NEO:6 PARAMETER:

“3-4 NEO:6 PARAMETER” (see page 38)

1. Select “3. SURR SETUP” from the MAIN MENU with the 3 or 4 cursor buttons and press

CHANNEL LEVEL SURR . MODE:

AUTO

CENTER		:	0 . 0dB
SURR . R		:	0 . 0dB
SURR . B	R	:	0 . 0dB
SURR . B	L	:	0 . 0dB
SURR . L		:	0 . 0dB
SUB W		:	0 . 0dB

CS PARAMETER

TRUBASS	:	0
SRS DIALOG	:	0

CHANNEL LEVEL SURR . MODE:

AUTO

CENTER		:	0 . 0dB
SURR . L		:	0 . 0dB
SURR . R		:	0 . 0dB
SURR . BACK	L	:	0 . 0dB
SURR . BACK	R	:	0 . 0dB
SUB W		:	0 . 0dB

the ENTER button.

RETURN EXIT RETURN NEXT EXIT

RETURN EXIT

2. Select the desired menu with the 3 or 4 cursor buttons and press the ENTER button.

3	. SURR	SETUP
CHANNEL LEVEL
PL x	MUSIC		PARAMETER
CS	PARAMETER
NEO:6	PARAMETER
HT - EQ		: OFF
LFE LEVEL		:

☞P. 38

PLx MUSIC PARAMETER

PARAMETER : DEFAULT

PANORAMA :OFF

DIMENSION : 0

CENTER WIDTH: 3

☞P. 38

NEO:6 PARAMETER

CENTER GAIN : 0 . 3

4. Select the desired menu item with the 3 or 4 cursor buttons, set the desired level with the 1 or 2 cursor buttons, and press the ENTER button.

SURROUND MODE:

The surround mode can be independently set for

RETURN NEXT EXIT

HT-EQ:

Select to active the HT-EQ with the 1 or 2 cursor buttons.

The tonal balance of a film soundtrack will be excessively bright and harsh when played back over audio equipment in the home. This is because film soundtracks were designed to be played back in large movie theater environments.

Activating the HT-EQ feature when watching a film made for movie theaters corrects this and restores the correct tonal balance.

The HT-EQ feature is available except in the following modes.

•7.1 CH INPUT

•PURE-DIRECT

•When Dolby Virtual Speaker is set for the surround mode

LFE LEVEL:

Select the output level of the LFE signal included in the Dolby Digital signal or the DTS signal.

Select “0dB”, “–10 dB” or “OFF” with 1 or 2 cursor button.

After you complete this portion of the setup, move the cursor to “RETURN” with the 3, 4, 1, 2 cursor buttons and press the ENTER button.

RETURN NEXT EXIT RETURN NEXT EXIT

Note:

•After you complete this portion of the setup, press the ENTER button to move the cursor to “RETURN” and press the ENTER button again to go to sub-menu.

3modes.

1.Multi Ch STEREO

2.CSII

3.Others

CHANNEL LEVEL

CENTER LEVEL:

Set the effect level of the center speaker between –12and +12 level in 0.5 level interval .

•If “NONE” was selected for the center speaker setting in the SPEAKER SIZE, then this setting will not appear.

SURR L or R LEVEL:

Set the effect level of the Surround speaker between –12and +12 level in 0.5 level interval .

•If “NONE” was selected for the surround speakers setting in the SPEAKER SIZE, then this setting will not appear.

SURR. BACK L or R LEVEL:

Set the effect level of the Surround Back speaker between –12and +12 level in 0.5 level interval .

•If “NONE” was selected for the surround back speakers setting in the SPEAKER SIZE, then this setting will not appear.

37