Global Machinery Company ST1800 guide

also imperative that you observe the accident prevention regulations in force in your area. The same applies for general rules of occupational health and safety.

The manufacturer shall not be liable for any changes made to the tool nor for any damage resulting from such changes.

Warning. When using power tools, basic safety precautions should always be taken to reduce the risk of fire, electric shock and personal injury. Also, please read and heed the advice given in the additional important safety instructions.

1.Keep the work area clean and tidy. Cluttered work areas and benches invite accidents and injury.

2.Consider the environment in which you are working. Do not use power tools in damp or wet locations.

Keep the work area well lit. Do not expose power tools to rain. Do not use power tools in the presence of flammable liquids or gases.

3.Keep visitors away from the work area. All visitors and onlookers, especially children and infirm persons, should be kept well away from where you are working. Do not let others in the vicinity make contact with the tool or extension cord.

4.Store tools safely. When not in use, tools should be locked up out of reach.

5.Do not force the tool. The tool will do the job better and safer working at the rate for which it was designed.

6.Use the correct tool for the job. Do not force small tools or attachments to do the job best handled by a heavier duty tool. Never use a tool for a purpose for which it was not intended.

7.Dress correctly. Do not wear loose clothing or jewellery. They can be caught in moving parts. Rubber gloves and non-slip footwear are recommended when working outdoors. If you have long hair, wear a protective hair covering.

8.Use safety accessories. Safety glasses and earmuffs should always be worn. A face or dust mask is also required if the operation creates dust.

9.Do not abuse the power cord. Never pull the cord to disconnect the blower vac from the power point or extension cable. Keep the cord away from heat, oil and sharp edges.

10.Do not overreach. Keep your footing secure and balanced at all times.

11.Look after your tools. Keep tools sharp and clean for better and safer performance. Follow the instructions regarding lubrication and accessory changes. Inspect tool cords periodically and, if damaged, have them repaired by an authorised service facility. Inspect extension cords periodically and replace them if damaged. Keep tool handles dry, clean and free from oil and grease.

12.Disconnect idle tools. Switch off before servicing, when changing accessories and when the tool is not in use.

13.Remove adjusting keys and wrenches. Check to see that keys and adjusting wrenches are removed from the tool before switching on.

14.Avoid unintentional starting. Always check that the switch is in the OFF position before connecting the 240V power supply. Do not carry a tool with the mains power connected with your finger on the switch.

15.Stay alert. Watch what you are doing. Use common sense. Do not operate a power tool when you are tired.

16.Check for damaged parts. Before using a tool, check that there are no damaged parts. If a part is slightly damaged, carefully determine if it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, proper mounting and any other conditions that may affect the operation of

ST1800 specifications

Global Machinery Company has established itself as a leader in the manufacturing of state-of-the-art machinery, and its flagship model, the ST1800, exemplifies the company’s commitment to innovation and efficiency. The ST1800 combines cutting-edge technologies with a user-friendly design, making it an ideal choice for various industrial applications.

One of the standout features of the ST1800 is its powerful engine, designed to deliver exceptional performance while maintaining fuel efficiency. The engine is equipped with advanced fuel injection technology, optimizing combustion for increased power output and reduced emissions. This not only lowers operational costs but also complies with stringent environmental regulations, making the ST1800 an eco-friendly option for businesses.

In terms of versatility, the ST1800 comes with an array of interchangeable attachments, enabling users to easily switch between different tasks. Whether it’s excavation, lifting, or material handling, the ST1800 adapts seamlessly to meet the demands of any project. This flexibility enhances productivity on job sites, as operators can tackle multiple tasks without needing to change equipment.

The ST1800 is also engineered for superior control and stability. It features an advanced hydraulic system that provides precise maneuverability, allowing operators to navigate tight spaces with ease. Coupled with a robust construction design, the machine promises durability and longevity, ensuring it withstands the rigors of heavy-duty usage.

Safety is a paramount concern for Global Machinery Company, and the ST1800 is equipped with several safety features to protect operators and bystanders alike. These include an intuitive control system, automatic shut-off in case of anomalies, and robust guarding around moving parts. These features not only enhance safety but also instill confidence in users when operating the machine.

Additionally, the ST1800 boasts a user-friendly interface, complete with an informative display that provides real-time data on machine performance. This feature, along with accessible service points, simplifies maintenance and reduces downtime, ultimately leading to cost savings and increased operational efficiency.

In conclusion, the Global Machinery Company ST1800 stands out as a versatile, efficient, and safe machinery solution. With its powerful engine, adaptable attachments, advanced hydraulic system, and commitment to user safety, the ST1800 is well-equipped to meet the demands of the modern industrial landscape, making it an invaluable asset for any operation. Whether in construction, landscaping, or other sectors, the ST1800 is poised to set new standards in machinery performance and reliability.