Shoulder strap

2.Slide the auxiliary handle over the housing as per the attached diagram, ensuring the handle is orientated so as the serrated or pattern surface aligns with the same pattern surface on the housing.

3.Fit the auxiliary locking knob and bolt through the handle and housing from the left hand side of the blower vac (same side as the blower vacuum selector) and tighten in a clockwise direction.

4.To adjust the angle of the handle, loosen the auxiliary locking knob (rotate in an anti-clockwise direction) and move the handle to the preferred position and then tighten the knob firmly.

Your ST1800 blower vac is supplied with a shoulder strap to assist with user comfort during use. The strap assembly can be fitted or removed from the top of the housing via the metal buckle on the end of the strap.

1.To open the buckle, remove the small retaining screw and washer, which retains the buckle pin in position. After removing the small screw & washer, remove the larger pin from the buckle. If the buckle was on the hosing, by removing the pin, the buckle will be free of the housing.

2.If you are fitting the buckle to the housing, slide the pin through the one side of the buckle and then through the housing. On the other side of the housing allow the pin to again pass through the hole in the buckle. Fit the small washer on to the retaining screw, and fit the screw into the end of the pin and tighten firmly.

3.To adjust the length of the shoulder strap, slide the plastic adjusting buckle up or down the strap,

A quick release is also fitted to the strap which allows the strap to be opened, but does not allow the strap to be removed from the blower vac.

Fitting the chute wheel assembly

The chute wheel assembly can be easily fitted or removed

from the end of the underside of the blow/vac tube.

1.Loosen the clamp screw 2–3 full turns. (it is not necessary to remove the clamp screw completely)

2.Slide the chute wheel assembly onto the mounting section at the end of the blow/vac tube.

3.Position the chute wheel assembly to the desired location and then tighten the clamp screw.

4.To adjust the position of the chute wheel assembly, loosen the clamp screw 2–3 turns and reposition the chute wheel assembly by sliding it backwards or forwards.

5.Retighten the clamp screw when the chute wheel assembly is repositioned.

Operation of the blower vac

Prior to using the blower vac, ensure you have read and understood this instruction manual.

Ensure you are wearing suitable clothing and also safety equipment like safety glasses, ear protection and a mask if necessary.

Ensure the attachments to the blower vac are correctly fitted and adjusted.

Be aware of other people and animals in the area where you are to be operating the blower vac.

To turn the blower vac on

1.Check the on/off switch is in the off position. This is where the slide switch is in the back position and the letter “O” is displayed towards the front of the slide switch.

2.Plug the power cord into an approved electrical extension cord, and turn the extension cord on.

3.Ensuring the blower vac is directed in a safe direction, push the on/off switch forward and the blower vac will start. The letter “I” will be displayed on the rear section of the slide switch when the switch is in the “on” position.

Be sure to be holding the blower vac firmly on start up.

ST1800 specifications

Global Machinery Company has established itself as a leader in the manufacturing of state-of-the-art machinery, and its flagship model, the ST1800, exemplifies the company’s commitment to innovation and efficiency. The ST1800 combines cutting-edge technologies with a user-friendly design, making it an ideal choice for various industrial applications.

One of the standout features of the ST1800 is its powerful engine, designed to deliver exceptional performance while maintaining fuel efficiency. The engine is equipped with advanced fuel injection technology, optimizing combustion for increased power output and reduced emissions. This not only lowers operational costs but also complies with stringent environmental regulations, making the ST1800 an eco-friendly option for businesses.

In terms of versatility, the ST1800 comes with an array of interchangeable attachments, enabling users to easily switch between different tasks. Whether it’s excavation, lifting, or material handling, the ST1800 adapts seamlessly to meet the demands of any project. This flexibility enhances productivity on job sites, as operators can tackle multiple tasks without needing to change equipment.

The ST1800 is also engineered for superior control and stability. It features an advanced hydraulic system that provides precise maneuverability, allowing operators to navigate tight spaces with ease. Coupled with a robust construction design, the machine promises durability and longevity, ensuring it withstands the rigors of heavy-duty usage.

Safety is a paramount concern for Global Machinery Company, and the ST1800 is equipped with several safety features to protect operators and bystanders alike. These include an intuitive control system, automatic shut-off in case of anomalies, and robust guarding around moving parts. These features not only enhance safety but also instill confidence in users when operating the machine.

Additionally, the ST1800 boasts a user-friendly interface, complete with an informative display that provides real-time data on machine performance. This feature, along with accessible service points, simplifies maintenance and reduces downtime, ultimately leading to cost savings and increased operational efficiency.

In conclusion, the Global Machinery Company ST1800 stands out as a versatile, efficient, and safe machinery solution. With its powerful engine, adaptable attachments, advanced hydraulic system, and commitment to user safety, the ST1800 is well-equipped to meet the demands of the modern industrial landscape, making it an invaluable asset for any operation. Whether in construction, landscaping, or other sectors, the ST1800 is poised to set new standards in machinery performance and reliability.