To empty the collection bag

Important notes when using the blower/ vacuum selector lever

Do not force the lever. The lever should move with very little resistance. If the lever is difficult to move, disconnect the power supply, remove the collection bag and ensure debris, dirt or mud has not jammed the lever inside the large round outlet.

When selecting either of the operations, ensure the selector lever is fully in one position or the other, not half way.

The collection bag is attached to the blower vac in 3 places. It is not necessary to remove the collection bag from the blower vac when the bag needs to be emptied.

The rear of the bag is fitted with a full length zip. Simply open the zip and empty the contents.

Ensure to close the zip prior to operating the blower vac.

Tips for using your blower vac

The following points may assist you in the operation of the blower vac.

•Always try and vacuum dry leaves, cuttings or general garden debris.

•Wet material is difficult to mulch and also can cause the blower vac to clog.

•If the leaves etc. are damp, then use the blower vac in blow selection to pile the leaves etc. into one area, vac and mulch the leaves when dry.

•Avoid using the vac on areas where there are stones, or other hard objects. These objects will damage the impellor of the blower vac.

•It is also advisable not to allow the blower vac to pick up soil. Soil generally contains moisture and when combined with other garden debris can clog the blower vac.

•The blower vac is not a garbage disposal unit. Do not

attempt to mulch any material than general garden debris.

•For better performance and comfort, it is recommended the collection bag is emptied when it becomes approximately half full. This reduces the weight and also allows the vac operation to perform at its highest level.

Maintenance and storage information

Prior to cleaning or any maintenance, always ensure the power plug has been removed from the electrical power supply.

When you have finished using the blower vac, always check to make sure the product is clean and free of dirt and debris. This is important around the selector lever flap which is just inside the round outlet. To check this area, remove the collection bag and ensure this area inside the outlet tube is free of debris and dirt.

Operate the selector lever backwards and forwards to ensure correct operation.

Do not hose or submerge any part of the blower vac. Do not use solvents to clean the blower vac.

Store the blower vac in a dry place, and out of reach of children.

Replacement of the electrical supply cord

If the supply cord of this product is damaged, it must be replaced by the manufacturer or its service agent, or similarly qualified person in order to avoid a hazard.

ST1800 specifications

Global Machinery Company has established itself as a leader in the manufacturing of state-of-the-art machinery, and its flagship model, the ST1800, exemplifies the company’s commitment to innovation and efficiency. The ST1800 combines cutting-edge technologies with a user-friendly design, making it an ideal choice for various industrial applications.

One of the standout features of the ST1800 is its powerful engine, designed to deliver exceptional performance while maintaining fuel efficiency. The engine is equipped with advanced fuel injection technology, optimizing combustion for increased power output and reduced emissions. This not only lowers operational costs but also complies with stringent environmental regulations, making the ST1800 an eco-friendly option for businesses.

In terms of versatility, the ST1800 comes with an array of interchangeable attachments, enabling users to easily switch between different tasks. Whether it’s excavation, lifting, or material handling, the ST1800 adapts seamlessly to meet the demands of any project. This flexibility enhances productivity on job sites, as operators can tackle multiple tasks without needing to change equipment.

The ST1800 is also engineered for superior control and stability. It features an advanced hydraulic system that provides precise maneuverability, allowing operators to navigate tight spaces with ease. Coupled with a robust construction design, the machine promises durability and longevity, ensuring it withstands the rigors of heavy-duty usage.

Safety is a paramount concern for Global Machinery Company, and the ST1800 is equipped with several safety features to protect operators and bystanders alike. These include an intuitive control system, automatic shut-off in case of anomalies, and robust guarding around moving parts. These features not only enhance safety but also instill confidence in users when operating the machine.

Additionally, the ST1800 boasts a user-friendly interface, complete with an informative display that provides real-time data on machine performance. This feature, along with accessible service points, simplifies maintenance and reduces downtime, ultimately leading to cost savings and increased operational efficiency.

In conclusion, the Global Machinery Company ST1800 stands out as a versatile, efficient, and safe machinery solution. With its powerful engine, adaptable attachments, advanced hydraulic system, and commitment to user safety, the ST1800 is well-equipped to meet the demands of the modern industrial landscape, making it an invaluable asset for any operation. Whether in construction, landscaping, or other sectors, the ST1800 is poised to set new standards in machinery performance and reliability.