Chapter 4 Printer Maintenance

193

Resetting the HP TonerGauge

After a new toner cartridge is installed, the user must reset the

HP TonerGauge from the control panel. When the top cover is closed after installing the new toner cartridge, the NEW TONER CARTRIDGE=NO message is displayed on the control panel for approximately 30 seconds. To reset the HP TonerGauge:

Note

 

If the NEW TONER CARTRIDGE=NO message is no longer displayed on the

 

 

control panel, press MENU repeatedly until CONFIGURATION MENU appears.

 

 

When you replace an empty or low toner cartridge, press ITEM repeatedly

 

 

until NEW TONER CARTRIDGE=NO appears.

 

 

 

1

Press - VALUE + until YES appears.

2

Press SELECT to save the selection.

3

Press GO to exit the menu.

Managing the Toner Cartridge

Page 193
Image 193
HP 8150 MFP, 8150 N, 8150 DN manual Resetting the HP TonerGauge, Printer Maintenance 193