HP 8150 DN, 8150 N, 8150 MFP manual Problem Solving 274 Printing is Incomplete or Incorrect

Chapter 5 Problem Solving 274

Printing is Incomplete or Incorrect (continued)

SituationSolution

Printing stops in the middle of the job.

!Check the control panel display for an error message.

!If you are on a network, make sure the computer is correctly configured and there is not a network problem (see your network administrator).

!Check the line voltage to make sure that it is steady and within printer specifications. (See page 418.) Turn the printer off and then back on.

!Check the time-out setting in your network application. You might need to increase it.

!If you are trying to copy a file to the printer from the DOS prompt, use the copy command COPY [filename] LPTn /B printer port, such as LPT1 (where n is the port number).

Note

To output the page, you might have to send a form feed command from the computer.

Correcting Output Quality Problems