Chapter 3 Advanced Printing Tasks

185

Edge-to-Edge Printing

This feature provides the user with the ability to print within approximately 2 millimeters of all edges of the page.

An internal-tray calibration page allows the administrator to calibrate each tray. The calibration page can be printed from each internal tray and the top tray of an external paper-handling device. The calibration page cannot be printed from the envelope feeder.

The edge-to-edge print mode is set from the printer driver or the control panel. It is most common to use the printer driver when printing individual print jobs. When set from the control panel, the edge-to-edge feature will remain in edge-to-edge print mode until turned off from the control panel or from a print job.

To print a calibration page:

1Make sure that paper is loaded in the desired tray or trays and that the trays are properly inserted into the printer

2Press MENU repeatedly until PAPER HANDLING MENU appears.

3 Press ITEM repeatedly until CONFIGURE EDGE TO EDGE=NO appears.

Continued on next page.

Edge-to-Edge Printing

Page 185
Image 185
HP 8150 MFP, 8150 N, 8150 DN manual Edge-to-Edge Printing, Advanced Printing Tasks 185