Chapter 5

Problem Solving

228

Printer Messages (continued)

 

 

 

 

Message

Explanation or Recommended Action

 

BAD DUPLEXER The duplexer is not connected properly.

CONNECTION

Turn the printer off. Re-install the duplexer. Turn the printer back on.

CHECK FINISHER DEVICE

alternates with

CLEAR JAM

The finishing device, such as a stapler, has a jam. Remove jammed paper from the specified location. Open and close the top cover to clear the message.

Make sure that the finishing device is properly connected.

If the message persists, see the user guide that came with the device.

CHECK FINISHER

The finisher cannot bind the paper correctly. The paper feeding into

DEVICE

the device is mis-aligned.

alternates with

Remove any jammed paper. Align the paper properly and reprint

FINISHER ALIGN

the job if necessary.

ERROR

 

 

If the message persists, see the user guide that came with the

 

device.

Understanding Printer Messages

Page 228
Image 228
HP 8150 N, 8150 MFP, 8150 DN manual Chapter Problem Solving 228 Printer Messages