HP 8150 N, 8150 MFP, 8150 DN manual Problem Solving 312

Models: 8150 8150 N 8150 DN 8150 MFP

1 523
Download 523 pages 42.13 Kb
Page 312
Image 312

Chapter 5 Problem Solving

312

If the print server failed to link, verify that all cables are correctly connected. If the print server still fails to link, follow the steps below to reconfigure the print server.

1Use the EIO menu to manually set the link speed (10 or 100 Mbps) and communication mode (full or half-duplex) so that they match the network. (See the EIO menu on page 460.) For example, if the port on the network switch is set for 100TX full-duplex operation, you must set the print server for 100TX full-duplex operation.

2Turn the printer off and back on.

3Check the print server operation. If the print server fails to link, contact a local authorized HP dealer or service representative.

Correcting Output Quality Problems

Page 312
Image 312
HP 8150 N, 8150 MFP, 8150 DN manual Problem Solving 312