HP 8150 N, 8150 MFP, 8150 DN manual Problem Solving 303 HP Fast InfraRed Connect Problems

Chapter 5 Problem Solving 303

HP Fast InfraRed Connect Problems (continued)

Situation	Solution
Connection cannot be	! Use a device that is IRDA-compliant; look for an IRDA
established or seems to	symbol on the device or see the computer’s user guide for
take longer than usual.	IRDA specifications.
	! Make sure that the operating system on your computer
	includes an FIR driver and your application uses a
	compatible driver. (Note that complex pages take longer to
	print.)
	! Position the HP Fast InfraRed Connect within the range of
	operation described in Printing a Job on page 182, and
	make sure that no object is blocking the connection. (This
	object could be a hand, paper, books, or even bright light.)
	! Make sure that the two FIR ports are clean (free from dirt
	and grease).
	! Bright light of any kind (sunlight, incandescent light,
	fluorescent light, or light from an infrared remote control,
	such as those used for TVs and VCRs) shining directly into
	one of the FIR ports might cause interference. Make sure
	that no bright light is shining directly into either FIR port.
	! Position the portable device closer to the FIR port on the
	printer.

Correcting Output Quality Problems