HP 8150 N, 8150 MFP, 8150 DN manual Ram Disk=Auto Off, Disk Size

Appendix B Control Panel Menus			452
Item		Values	Explanation
RAM	DISK=AUTO	OFF	This item determines how the RAM disk is
		ON	configured. This item appears only if there is no
		AUTO	optional hard disk installed and the printer has at
			least 12 MB of memory.
			OFF: The RAM disk is disabled.
			ON: The RAM disk is enabled. Configure the amount
			of memory to be used through the following item: RAM
			DISK SIZE.
			Note
			If the setting is changed from OFF to ON or from OFF to
			AUTO, the printer will automatically reinitialize when it
			becomes idle.
RAM	DISK	0K and up	This item determines the size of the RAM disk. This
SIZE=xxxK		(This value	item appears if RAM DISK=ON or AUTO.
		depends on	Press - VALUE + to change settings by increments of
		the amount of	100.
		installed

memory.)

Note

This setting cannot be changed if RAM DISK=AUTO. Changing this value will cause the printer to reinitialize when it becomes idle.

Configuration Menu