HP 8150 N, 8150 MFP, 8150 DN manual Problem Solving 272 Printing is Incomplete or Incorrect

Chapter 5 Problem Solving 272

Printing is Incomplete or Incorrect (continued)

SituationSolution

Garbled pages print, there are overprints, or only a portion of a page prints.

!Make sure that your software application is configured for the correct printer.

!Replace the printer interface (I/O) cable with a cable you know works to see if the cable is defective.

!Your parallel printer cable might be defective. Use a high-quality cable; see page 48 for an HP cable part number.

!Set the PERSONALITY item in the Configuration Menu to AUTO (page 446). The printer may have been set to PCL and a PS job was sent to the printer, or vice versa.

!Data sent to the printer may be corrupt. Try sending another file to see if it prints.

The job was not	! Turn the printer off. Make sure that the duplexer is properly
duplexed.	installed. Turn the printer on.
	! Make sure that you are using the correct paper size
	(page 396).
	! Make sure that you are following the guidelines for printing
	on both sides of the paper (see 118).

Correcting Output Quality Problems