0..9 .

6The decoded data appears after confirmation. You can go back to change the data. Select the corresponding input field using B 1 or CLEAR .

Change the data with

7.When all input data are correct, press STATUS/EXIT . The programming is stored in a

TIMER block.

Switching on 'VPS/PDC' in the 'START' input field

Select 'VPS/PDC' using B 1 CLEAR . Press '1' to switch off 'VPS/PDC' or press '2' to switch on 'VPS/PDC'.

8.Insert a cassette with an intact security tab

(unprotected).

Problems and solutions for pro- grammed recordings

The TV-Video Combi will not operate

*If you want to cancel the programmed record- ing, press C/A .

Cassette is ejected during recording

*The end of the tape was reached during recording.

Error message:

*If you forgot to insert a cassette,'INSERT CASSETTE FOR TIMER RECORDING' will appear.

* If, after pressing SV/V+ , the error message 'FULL' appears, then all TIMER blocks are already programmed. No new recordings can be programmed unless you clear a TIMER block. To delete a Timer block, select it with

B 1 and

L C in the Timer List screen and

erase it with

CLEAR .

Cassette was ejected as soon as inserted.

*If a cassette with the security tab removed was inserted, 'PROTECTED CASSETTE TIMER CANNOT RECORD' will appear. Undo the erase protection (chapter 'Manual Recording', section 'Preventing accidental eras- ing of cassettes') or insert another cassette.

Programming a recording (without VIDEO Plus+ system)

1.Press MENU . The main menu will appear.

2.Select 'TIMER' with K B L C . Then press

B 1 .

3.Select ONCE, DAILY, or WEEKLY recording with K B L C . Then press B 1 .

SELECT K L CHOOSE B

ONCE

DAILY WEEKLY TIMER LIST

END=EXIT

If all TIMER blocks are in use, 'FULL' will appear on the TV screen.

4.Select TIMER block with 0..9 .

Selecting once/daily/weekly recordings

Use K B L C to select from the following options:

'ONCE': Recording once

'DAILY': Repeated daily recordings from Monday to Friday

'WEEKLY': Repeated weekly recordings (every week on the same day)

5.With 0..9 buttons you can enter 'START' (start time) , 'STOP' (end time) , 'PROG.' (pro- gramme number) ‘VPS/PDC’ and 'DATE'.

Programming a recording from the external sources

You can also programme recording from an external source via the Scart socket AV1 or the front A/V connectors AV2.

6.When all inputs are correct, press STATUS/EXIT . The programming information

is stored in a TIMER block.

7.Insert a cassette with an intact security tab (unprotected).

15

EN

Page 18
Image 18
Philips 14PV365/07 Problems and solutions for pro- grammed recordings, Programming a recording without Video Plus+ system