GE JDP37GP, JDP36GP, JDP39WR operating instructions Problem, Possible Cause, contin14ed next page

PROBLEM	I	POSSIBLE CAUSE
“F-” AND A NUM13ER		* If the time display flashes “F-” and a number, you have a function error code.
FLASH ON DISPLAY		Press the CLEAR/OFF pad. Allow oven to cool for one hour. Put oven back
		into operation. If the failure code repeats, disconnect all power to the range.
		Call for service.
OVEN WILL		● Plug on range is not completely inserted in the electrical outlet.
NOT WORK		● The circuit breaker in your house has been tripped, or a fuse has been blown.
	I *Ovencontrolsnotproperly set.
FOOD DOES NOT		* Oven controls not properly set. See the Broiling section.
BROIL PROPERLY		● Door not left ajar as recommended.
		* Improper shelf position being used. See the Broiling section.
		● Food is being cooked on a hot pan.
		● Cookware is not suited for broiling.
		● Aluminum foil used on the broiler pan rack has not been fhted properly
		and sIit as recommended.
FOOD DOES NOT		● Oven controls are not properly set.
ROAST OR BAKE		● Shelf position is not correct.
PROPERLY
		● Incorrect cookware or cookware of improper size is being used,
		● A foil tent was not used when needed to slow down browning during roasting.
OVEN LIGHT DOES		● Bulb mav. be loose or burned out.
	I
NOT COME ON		● Electrical plug must be plugged into a live power outlet.
OVEN TEMPERATURE	I	● Oven thermostat needs adjustment. See the Do It Yoursel~–Adjust the
TOO HOT OR TOO COLD		Oven Thermostat section.
CONTROL BEEPS AFTER		● This is reminding you to enter a bake temperature.
ENTERING OVEN TIME
ON STOP TIME
SURFACE UNITS		● Surface units are not plugged in solidly.
NOT FUNCTIONING		● Surface unit controls are not properly set.
PROPERLY
CLOCK AND TIMER		● Make sure the electrical plug is plugged into a live, properly grounded
DO NOT WORK		power outlet.
		● Check for power outage.
		(contin14ed next page)

29

—