GE JDP36GP, JDP39WR After a Clean Cycle, Operating The Self-Cleaning Oven, Questions and Answers

Models: JDP37GP JDP39WR JDP36GP

1 32
Download 32 pages 28.78 Kb
Page 24
Image 24
After a Clean Cycle

OPERATING THE SELF-CLEANING OVEN

(continued)

After a Clean Cycle

After a clean cycle, you may notice some white ash in the oven. Just wipe it up with a damp cloth.

If white spots remain, remove them with a soap-filled steel wool pad. Be sure to rinse thoroughly with a vinegar and water mixture. These deposits are usually a salt residue that cannot be removed by the clean cycle.

If the oven is not clean after one clean cycle, the cycle maybe repeated.

Questions and Answers

Q. If my oven clock is not set to the correct time of day, can I still self-clean my oven?

A. If the clock is not set to the correct time of day you will not be able to set a delay clean to end at a specific time.

Q. Can I use commercial oven cleaners on any part of my self-cleaning oven?

A.No cleaners or coatings should be used around any part of this oven. If you do use them and do not thoroughly rinse the oven with water, wiping it absolutely clean afterwards, the residue can scar the oven surface and damage metal parts the next time the oven is automatically cleaned.

Q, What should I do if excessive smoking occurs during cleaning?

A. This is caused by excessive soil. Press the CLEAIUOFF pad. Open the windows to rid the room of smoke. Wait until the oven has cooled and the word “LOCK” is off in the display. Wipe up the excess soil and reset the clean cycle.

Q. Is the “crackling” or “popping” sound I hear during cleaning normal?

A. Yes. This is the sound of the metal heating and cooling during both the cooking and cleaning functions.

Q. Should there be any odor during the cleaning?

A. Yes, there maybe an odor during the first few cleanings. Failure to wipe out excessive soil might also cause a strong odor when cleaning.

Q.What causes the hair-like lines on the enameled surface of my oven?

A.This is a normal condition, resulting from heating and cooling during cleaning. These lines do not affect how your oven performs.

Q.Why do I have ash left in my oven after cleaning?

A.Some types of soil will leave a deposit which

is ash. It can be removed with a damp sponge or cloth.

Q. My oven shelves do not slide easily. What is the matter?

A. After many cleanings, oven shelves may become so clean they do not slide easily. To make shelves slide more easily, after each self-cleaning function, dampen fingers with a small amount of cooking oil and rub lightly over sides of shelf where they contact shelf supports.

Q. My oven shelves have become gray after the self-clean cycle. Is this normal?

A. Yes. After the self-clean cycle, the shelves may lose some luster and discolor to a deep gray color.

Q. Can I cook food on the cooktop while the oven is self-cleaning?

A. Yes. While the oven is self-cleaning, you can use the cooktop just as you normally do.

24

Page 24
Image 24
GE JDP36GP, JDP39WR, JDP37GP After a Clean Cycle, Operating The Self-Cleaning Oven, Questions and Answers