GE JDP36GP, JDP39WR, JDP37GP The Problem Solver, Possible Cause, consumer information service

	THE PROBLEM SOLVER
			(continued)
PROBLEM		POSSIBLE CAUSE
TVEN WILL NOT			● Stop Time must be more than 3 hours later than Start Time.
SELF-CLEAN			● Oven temperature is too high to set self-clean operation. Allow the range to
			cool to room temperature and reset the controls.
OVEN NOT CLEAN AFTER		● Oven controls not set properly.
CLEAN CYCLE		● Heavily soiled ovens require a 3%-4 hour clean time.
		● Heavy spillovers should be cleaned up before starting the clean cycle.
“BURNING” OR “OILY”		● This is normal in a new oven and will dissipate in time. To speed the process,
ODOR EMITTING FROM			set a self-clean cycle )see the Operating the Self-Cleaning Oven section)
OVEN WHEN TURNED ON			lasting a minimum of 3 hours.

If you need more help...call, toll free: GE Answer Center”

800.626.2000

consumer information service

30