HP 8150 N, 8150 MFP, 8150 DN manual Label Construction, Appendix a Specifications 404

Appendix A Specifications 404

Label Construction

When selecting labels, consider the quality of each component:

!Adhesives: The adhesive material should be stable at 392° F (200° C), the printer’s maximum fusing temperature.

!Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets with spaces between the labels, causing serious jams.

!Curl: Prior to printing, labels must lie flat with no more than 0.5 inch (13 mm) of curl in any direction.

!Condition: Do not use labels with wrinkles, bubbles, or other indications of separation.

To print sheets of labels, see page 135.

Paper Specifications