Safety instructions

WARNING. Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings below refers to your mains- operated (corded) power tool or battery-operated (cordless) power tool.

Save these instructions

Work area

•Keep work area clean and well lit. Cluttered and dark areas invite accidents.

•Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

•Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

•Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

•Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

•Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

•Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

•When operating a power tool outdoors, use an outdoor extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

Personal safety

•Stay alert, watch what you are doing and use common sense when operating a power tool.

Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

•Use safety equipment. Always wear eye protection. Safety equipment such as a dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

•Avoid accidental starting. Ensure the switch is in the off-position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

•Remove any adjusting key or wrench before turning the tool on. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury.

•Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

•Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

•If devices are provided for the connection of dust extraction and collection facilities ensure that these are connected and properly used. Use of these devices can reduce dust-related hazards.

Power tool use and care

•Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

•Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

GEN2300ES specifications

The Global Machinery Company GEN2300ES is an innovative power generator designed to meet the needs of both residential and commercial users. This portable inverter generator is known for its reliability, efficiency, and versatile features, making it a popular choice among users seeking a dependable power source for various applications.

One of the standout features of the GEN2300ES is its impressive fuel efficiency, allowing it to operate for extended periods on a single tank. With a 2.3-gallon fuel capacity, it can deliver up to 10 hours of continuous power at a 25% load. This efficiency not only saves users money on fuel costs but also enhances its suitability for outdoor adventures, job sites, and emergency backup situations.

The GEN2300ES is powered by a robust engine that produces a clean and stable output. Thanks to its inverter technology, the generator is capable of producing pure sine wave power, making it safe for sensitive electronics, including laptops, smartphones, and medical devices. This makes it an ideal choice for users who require reliable power without any risk of damage to their equipment.

Another significant characteristic of the GEN2300ES is its lightweight and compact design. Weighing approximately 49 pounds, it features an ergonomic handle that makes it easy to transport. This portability is a crucial factor for campers, tailgaters, and users needing power on the go.

Furthermore, the GEN2300ES incorporates several user-friendly technologies. Its advanced digital display provides real-time updates on wattage usage, remaining run time, and maintenance alerts, ensuring that users can keep track of their generator’s performance. Additionally, it is equipped with a quiet operation system, producing only 52 dBA at a quarter load, allowing for peaceful surroundings during use.

Safety features are also paramount in the GEN2300ES design. It includes overload protection and low oil shut-off mechanisms to prevent engine damage. The generator is also compliant with EPA and CARB regulations, reflecting its commitment to environmental standards and user safety.

In conclusion, the Global Machinery Company GEN2300ES is a cutting-edge portable inverter generator that combines efficiency, portability, and advanced technology. With its rigorous safety features and ability to deliver clean power, it stands out as a reliable choice for users seeking to maintain power in diverse scenarios.