Fisher M-96 manual High Mode

Page 10

SETTING UP

HIGH MODE

1.Rest the search coil on the ground in an area you are reasonably sure is free of metal objects.

2.After going through BAT test in the NORMAL MODE, turn the MODE knob to HIGH.

3.Turn the GROUND knob to 5.

4.Push and releases the RETUNE button. The meter reading should be about 10 and the speaker should have a slight hum, or “threshold sound.”

5.Raise the coil straight up about 12 inches and note any changes in the meter indication and speaker volume.

6.If there is little or no change in the meter reading and volume, the M-96 is properly ground adjusted and you are ready to search. If there is a change, proceed to step A or B.

A.If the needle and sound level drop when you raise the coil, set the search coil flat on the ground, turn the GROUND knob to 4 and push and release the RETUNE button. Now raise the coil 12 inches from the ground and repeat steps 4 and 5, making minor adjustments to the GROUND knob until the meter reading and sound remain the same whether the search coil is flat on the ground or 12 inches in the air.

B.If the needle and sound level increase when you raise the coil, set the coil flat on the ground and turn the GROUND knob to 6, push and release the RETUNE button. Raise the coil 12 inches from the ground and repeat steps 4 and 5, making minor adjustments with the GROUND knob until the meter reading and sound remain the same whether the search coil is flat on the ground or 12 inches in the air.

The rule of thumb is this: if the volume increases when the coil is raised, turn the GROUND knob up. If the volume decreases, turn the GROUND knob down.

8

Image 10
Contents Operating Manual Contents About Your Detector Factory Preset ‘TURN-ON-AND-GO’ Marks Condensed Operating InstructionsHousing or the coil START-UP Procedure Keep the search coil parallel to the ground Setting UP Fitting the Detector to the OperatorNormal Mode High Mode Control Panel On/Off Ground KnobHeadphones Jack Search MethodsHelpful Hints Searching in WaterPinpointing Changing Batteries Specifications Page Fisher Research Laboratory A L I T Y

M-96 specifications

The Fisher M-96 is a high-performance metal detector designed for both amateur and professional treasure seekers. This device boasts an array of features and technologies that enhance the user experience and improve detection capabilities.

One of the standout characteristics of the Fisher M-96 is its advanced discrimination capabilities. This feature allows users to differentiate between valuable metals, such as gold and silver, and unwanted materials like iron or aluminum. The detector's adjustable discrimination settings enable tailored searches based on the specific environment, allowing treasure hunters to focus their efforts efficiently.

The M-96 also includes a powerful VLF (Very Low Frequency) technology that boosts sensitivity for small and deeply buried targets. This technology is particularly beneficial for those searching for coins, relics, and jewelry. The device operates at a frequency of 12 kHz, which strikes an optimal balance between depth and sensitivity, ensuring users can detect various metals without compromising performance.

Another notable aspect of the Fisher M-96 is its target ID system. The LCD screen displays a numerical value correlating to the type of metal detected, providing users with immediate feedback on potential finds. This visual aid assists in decision-making during searches, enhancing the overall efficiency of the treasure-hunting process.

Portability is a significant advantage of the M-96. Weighing in at just over 2.5 pounds (approximately 1.13 kg), this lightweight detector is easy to carry for extended periods without causing fatigue. The adjustable telescoping shaft allows users of different heights to find a comfortable position, further enhancing ergonomic usability.

The Fisher M-96 is also weather-resistant, making it suitable for use in various outdoor conditions. The device's durable construction ensures that it can withstand the rigors of outdoor adventures, including potential exposure to moisture and dust.

In terms of power, the Fisher M-96 is designed to be efficient, often functioning on standard batteries that provide extended usage times. Its energy efficiency allows for prolonged sessions without the need for frequent battery changes, making it a practical choice for avid detectorists.

Overall, the Fisher M-96 stands out as a versatile and reliable metal detector, combining advanced technology with user-friendly features. Its discrimination capabilities, target ID system, lightweight design, and weather resistance make it an excellent option for anyone looking to explore the world of treasure hunting. Whether searching for relics, lost valuables, or simply enjoying a day outdoors, the Fisher M-96 provides an engaging and rewarding experience.