Fisher M-96 manual Pinpointing

Page 14

PINPOINTING

Accurate pinpointing with the M-96 takes some practice but not much. With a little experience, you should be able to pinpoint buried targets in just a few seconds.

1.Once the presence of a buried target is indicated by a sharp increase in the audio signal and needle movement, continue moving the search coil from side-to-side across the target area in a narrower and narrower search pattern.

2.Stop the search coil over the spot where you receive the loudest response and highest meter reading.

3.Now move the coil slowly forward and straight back a couple of times, again stopping over the strongest response.

4.Move the search coil side-to-side one more time and stop over the strongest signal once again. Your target should be directly below the center of the search coil.

5.For quick and accurate pinpointing of strong signals, push the RETUNE button momentarily, close to, but not over, the target area. This will “detune” the M-96 so that it responds over a smaller area, making pinpointing of the object easier. “Detuning” also reduces depth penetration.

CAUTION:

The ultra-slow auto-tune circuitry is constantly retuning the M- 96 just fast enough to counteract any drift caused by humidity, temperature changes, etc. If the search coil is held for a prolonged period of time over a target, the M-96 will eventually “tune out” the target and the signal will fade. A brief negative- meter response may also result when the coil is moved away from the target. In either case, the M-96 may be instantly retuned to the “threshold” level by pushing the RETUNE button while holding the coil away from the target area.

12

Image 14
Contents Operating Manual Contents About Your Detector Factory Preset ‘TURN-ON-AND-GO’ Marks Condensed Operating InstructionsHousing or the coil START-UP Procedure Keep the search coil parallel to the ground Setting UP Fitting the Detector to the OperatorNormal Mode High Mode Control Panel On/Off Ground KnobHeadphones Jack Search MethodsHelpful Hints Searching in WaterPinpointing Changing Batteries Specifications Page Fisher Research Laboratory A L I T Y

M-96 specifications

The Fisher M-96 is a high-performance metal detector designed for both amateur and professional treasure seekers. This device boasts an array of features and technologies that enhance the user experience and improve detection capabilities.

One of the standout characteristics of the Fisher M-96 is its advanced discrimination capabilities. This feature allows users to differentiate between valuable metals, such as gold and silver, and unwanted materials like iron or aluminum. The detector's adjustable discrimination settings enable tailored searches based on the specific environment, allowing treasure hunters to focus their efforts efficiently.

The M-96 also includes a powerful VLF (Very Low Frequency) technology that boosts sensitivity for small and deeply buried targets. This technology is particularly beneficial for those searching for coins, relics, and jewelry. The device operates at a frequency of 12 kHz, which strikes an optimal balance between depth and sensitivity, ensuring users can detect various metals without compromising performance.

Another notable aspect of the Fisher M-96 is its target ID system. The LCD screen displays a numerical value correlating to the type of metal detected, providing users with immediate feedback on potential finds. This visual aid assists in decision-making during searches, enhancing the overall efficiency of the treasure-hunting process.

Portability is a significant advantage of the M-96. Weighing in at just over 2.5 pounds (approximately 1.13 kg), this lightweight detector is easy to carry for extended periods without causing fatigue. The adjustable telescoping shaft allows users of different heights to find a comfortable position, further enhancing ergonomic usability.

The Fisher M-96 is also weather-resistant, making it suitable for use in various outdoor conditions. The device's durable construction ensures that it can withstand the rigors of outdoor adventures, including potential exposure to moisture and dust.

In terms of power, the Fisher M-96 is designed to be efficient, often functioning on standard batteries that provide extended usage times. Its energy efficiency allows for prolonged sessions without the need for frequent battery changes, making it a practical choice for avid detectorists.

Overall, the Fisher M-96 stands out as a versatile and reliable metal detector, combining advanced technology with user-friendly features. Its discrimination capabilities, target ID system, lightweight design, and weather resistance make it an excellent option for anyone looking to explore the world of treasure hunting. Whether searching for relics, lost valuables, or simply enjoying a day outdoors, the Fisher M-96 provides an engaging and rewarding experience.