EarthQuake W1200 dimensions Safety Decal, Steps for Working on Electric Log Splitter

Operator's Manual

5-Ton Electric Log Splitter W1200

•Do not use the log splitter in wet or damp areas or expose it to rain.

•Never try to split logs larger than those indicated in the specifications table. Failure to do so may damage the machine. Do not use the log splitter for anything other than splitting logs. Do not force log through splitter.

•Never use an extension cord that is not rated for outdoor use. The cord should not be longer than 30 feet. The cord should be of a heavy-duty construction (12-10 AWG).

•Check that the electric circuit is adequately protected and that it corresponds with the power, voltage and frequency of the motor. Check that there is a ground connection and a regulation differential switch upstream. Ground the log splitter. Prevent body contact with ground surfaces: pipes, radiatiors, ranges, refrigerator enclosures, etc. Never open the pushbutton box on the motor. Make sure your fingers do not touch the plug’s metal prongs when plugging in or unplugging the log splitter.

•Do not remove jammed logs with your hands. If an object becomes lodged in the ram, unplug electric motor before attempting to remove the foreign object.

•Do not use the log splitter in areas where fumes from paint, solvents, or flammable liquids pose a potential fire/ explosion hazard.

SAFETY DECAL

The Earthquake Electric Log Splitter has been designed and manufactured to provide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing.

Reading this manual, and the safety instructions it contains, will provide you with the necessary knowledge to operate this equipment safely and effectively. We have placed a safety de- cal on the log splitter to remind you of some of the important information while you are operating the unit.

This important safety decal is illustrated below, and is shown here to help familiarize you with the location and content of the safety messages you will see as you perform normal log splitting operations. Please review this decal now, and if you have any questions regarding its meaning or complying with these instructions, reread the complete safety instruction text in this manual, or contact your local dealer.

The decal below is located on the side panel of the log cradle above the main power switch. Should this decal become un- readable, because of being worn, faded, or otherwise damaged during the use of your log splitter, please use the part number information provided to order a replacement label from your local authorized dealer. These decals are easily applied, and will act as a constant visual reminder to you, and others who may use the equipment, to follow the safety instructions necessary for safe, effective operation of your log splitter.

•Use only original equipment parts from Ardisam, Inc., including all nuts and bolts.

•Disconnect power by unplugging power cord when not in use, before making adjustments, changing parts, cleaning, or working on the log splitter.

•Maintain and keep the log splitter clean for the best and most safe performance.

Steps for Working on Electric Log Splitter

1. Turn off motor switch. Unplug motor.

2.Replace or repair the part on the log splitter.

3.Check all parts that were repaired, or removed during repair, to ensure they are secure and fit correctly.

NOTE: All repair parts must come from the factory. Never replace parts that are not specifically designed for this log splitter.

Warning Decal

	1	2	3		4	5
6	7		8	9	10	11

1.Crush hazard - hand

2.Take care when removing jammed logs from wedge

3.Clean up any spills

4.Read owners manual be fore using

5.Use protective eyeware

6.Danger - Keep clear of moving parts

7.Unplug before servicing

8.Maintain a safe distance from bystanders when operating

9..Do not operate without guards

10.Use protective footware

11.Use protective gloves.

4

Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5