Maintenance, Replacing hydraulic oil | EarthQuake W1200 guide

Operator's Manual

5-Ton Electric Log Splitter W1200

MAINTENANCE

Replacing hydraulic oil

Replace the hydraulic oil in the log splitter after every 150 hours of use. Take the following steps to replace the oil.

1.Make sure all moving parts are stopped and the log split- ter is unplugged.

2.Remove oil drain bolt and dipstick. Make sure bleed screw is closed tight. (SEE FIGURE 9)

3.Turn the log splitter on the support leg side over using a one gallon or larger capacity container to drain the hy- draulic oil. (SEE FIGURE 10)

4.Turn the log splitter on the motor side.

(SEE FIGURE 11)

5. Refill with 3.75 quarts of fresh hydraulic oil.

6.While keeping the log splitter vertical, clean the surface of dipstick on the oil drain bolt and put it back into the oil tank.

7.Make sure the level of the refilled oil is between the two grooves around the dipstick.

8.Clean the oil drain bolt before re-threading it back in. Make sure the bolt is tightened to avoid leakage before placing the log splitter horizontally.

IMPORTANT: Loosen bleed screw 3-4 turns before operation.

Periodically check oil level to ensure it is between the two grooves around the dipstick. If the level is below the lower limit, fill until level is correct.

The following hydraulic oils, or equivalent, are recommended for the log splitter’s hydraulic pump:

SHELL Tellus 22

MOBIL DTE 11

ARA Vitam GF 22

BP Energol HLP-HM 22

bleed screw

oil drain dipstick plug

full mark

Figure 9

oil drain container

Figure 10

sharpening wedge

When the log splitter wedge becomes dull and/or worn, sharpen the wedge using a fine-toothed file and smooth any burrs or crushed areas along the cutting edge.

Figure 11

Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5

W1200 specifications

EarthQuake W1200 is a cutting-edge seismic measurement and analysis system designed to enhance our understanding and response to seismic activities. This state-of-the-art technology is engineered to monitor and provide data on earthquakes with unprecedented accuracy, promising significant improvements in both research and real-time emergency response.

One of the main features of the EarthQuake W1200 is its advanced sensor array. The system utilizes a combination of accelerometers, geophones, and broadband seismometers to capture a wide range of seismic data. This multi-sensor approach allows for the detection of even minor tremors, enabling researchers to analyze smaller seismic events that could precede larger earthquakes. The high sensitivity of the sensors also ensures that data is recorded with a high degree of precision, which is critical for understanding the underlying geological processes.

Another notable characteristic of the EarthQuake W1200 is its robust data processing capabilities. Equipped with a high-performance computational engine, the system can analyze massive datasets in real time. The built-in algorithms facilitate rapid interpretation of seismic waves, helping researchers differentiate between various types of seismic events. This functionality is particularly valuable during seismic emergencies, as it enables quicker and more informed decision-making regarding public safety measures and emergency response.

In addition to its hardware capabilities, the EarthQuake W1200 features advanced communication technologies that allow for seamless data transmission. The system supports both wired and wireless connectivity, ensuring that data can be shared instantly with research institutions, government agencies, and emergency management teams. This interconnectedness promotes collaboration among seismologists and enhances the overall effectiveness of disaster preparedness and response strategies.

Furthermore, EarthQuake W1200 is designed with user-friendly software that provides intuitive interfaces for both data visualization and analysis. Users can easily access real-time data, historical seismic records, and predictive models, making it a valuable tool for educational purposes and public awareness campaigns.

In conclusion, EarthQuake W1200 stands out as a transformative technology in the field of seismology. With its advanced sensors, real-time processing capabilities, robust communication features, and user-friendly software, it enables researchers and decision-makers to better understand seismic events and enhance disaster preparedness. As we continue to confront the challenges posed by earthquakes, innovations like the EarthQuake W1200 will play a crucial role in safeguarding communities and saving lives.