SET-UP and PRE-OPERATION, See Figure | EarthQuake W1200 instruction

Operator's Manual

5-Ton Electric Log Splitter W1200

SET-UP AND PRE-OPERATION

1	11	10
1		10
2		9.

3	8

Warning

For your own safety, do not connect the log splitter to the power source until the machine is completely assembled and you read and understand the entire instruction manual.

For your own safety, never forget to bolt the wheel bracket to the log splitter, lift the log splitter by the handles at both ends and place it on a 60-75cm high, stable, flat and levelwork

Figure 1

5 6

surface.

Never use the log splitter if it is not in perfect order or if it needs servicing. Before starting work, check correct functioning of all the controls (hydraulic lever, push button).

Before attempting to use, familiarize yourself with all the operating features and safety requirements of your log splitter.

(SEE FIGURE 1)

1. Wedge	8. 2-hand operating
2. Oil tank	hydraulic control lever
3. Carrying handle	9.. Safety guard for 2-hand
4. Supporting leg	operating hydraulic
5. Motor w/push switch	control lever
& circuit breaker	10. Log pusher
6. Rubber feet	11. Log cradle
7. Rolling wheel

bleed screw

dipstick

oil drain plug

Figure 2

Caution

Failureto loosenthe bleed screwwill result in air being compressed and decompressed in the hydraulic system. Continuous air compression and decompression will blow out the seals of the hydraulic system and cause permanent damage to the log splitter.

Caution

DO NOT adjust the maximum pressure limiting screw. The pressure limiting screw has been sealed atthe factoryto prevent unauthorized adjusting. Resetting the screw will cause the hydraulic pump to fail to output enough splitting pressure or causetoo much pressure, which may result in serious injury, as well as damage to the machine.

Important

Before operating the log splitter, the bleed screw should be loosened by 3-4 rotations so air can go in and out of the oil tank smooth- ly. Air flow thru the bleed screw hole should be detectable during log splitter operation. Before moving the log splitter, make sure the bleed screw is tightened to avoid oil leakage from this point. (See Figure 2)

Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5

W1200 specifications

EarthQuake W1200 is a cutting-edge seismic measurement and analysis system designed to enhance our understanding and response to seismic activities. This state-of-the-art technology is engineered to monitor and provide data on earthquakes with unprecedented accuracy, promising significant improvements in both research and real-time emergency response.

One of the main features of the EarthQuake W1200 is its advanced sensor array. The system utilizes a combination of accelerometers, geophones, and broadband seismometers to capture a wide range of seismic data. This multi-sensor approach allows for the detection of even minor tremors, enabling researchers to analyze smaller seismic events that could precede larger earthquakes. The high sensitivity of the sensors also ensures that data is recorded with a high degree of precision, which is critical for understanding the underlying geological processes.

Another notable characteristic of the EarthQuake W1200 is its robust data processing capabilities. Equipped with a high-performance computational engine, the system can analyze massive datasets in real time. The built-in algorithms facilitate rapid interpretation of seismic waves, helping researchers differentiate between various types of seismic events. This functionality is particularly valuable during seismic emergencies, as it enables quicker and more informed decision-making regarding public safety measures and emergency response.

In addition to its hardware capabilities, the EarthQuake W1200 features advanced communication technologies that allow for seamless data transmission. The system supports both wired and wireless connectivity, ensuring that data can be shared instantly with research institutions, government agencies, and emergency management teams. This interconnectedness promotes collaboration among seismologists and enhances the overall effectiveness of disaster preparedness and response strategies.

Furthermore, EarthQuake W1200 is designed with user-friendly software that provides intuitive interfaces for both data visualization and analysis. Users can easily access real-time data, historical seismic records, and predictive models, making it a valuable tool for educational purposes and public awareness campaigns.

In conclusion, EarthQuake W1200 stands out as a transformative technology in the field of seismology. With its advanced sensors, real-time processing capabilities, robust communication features, and user-friendly software, it enables researchers and decision-makers to better understand seismic events and enhance disaster preparedness. As we continue to confront the challenges posed by earthquakes, innovations like the EarthQuake W1200 will play a crucial role in safeguarding communities and saving lives.