Echo SRM-225 specifications Stopping Engine, Move stop switch button a backward to Stop position

Page 20

OPERATION	SRM-225

Move stop switch button (A) forward away from the STOP position.

2.Purge Bulb

Pump purge bulb (C) until fuel is visible in the “Clear” fuel return line. Pump bulb an additional 4 or 5 times.

C

3.Recoil Starter

Lay the unit on a flat area and keep movable attachment parts clear of all obstacles. Firmly grip throttle handle and throttle trigger lockout with left hand. Rapidly pull recoil starter handle/rope (D) until engine fires.

Note: If engine does not start after 5 pulls, use Cold Start

Procedure.

D

Stopping Engine

1. Throttle

A

Release throttle trigger and allow engine to return to idle before shutting off engine.

2.Stop Switch

Move stop switch button (A) backward to STOP position.

If engine does not stop when stop switch is moved to STOP position, close choke - COLD START position - to stall

engine. Have your ECHO dealer repair stop switch before using unit again.

20	X7722271109

© 2/2014 ECHO Inc.

Image 20

Contents Operator’s Manual Burn HazardTable of Contents Introduction Servicing InformationManual Safety Symbols and Important Information SafetyAdditional or Replacement Manuals International Symbols On / OFFPersonal Condition and Safety Equipment Vibration and Cold Repetitive Stress InjuriesEquipment Product Emission Durability Emission Compliance Period Emission Control Exhaust & EvaporativeEPA 2010 and Later and/or C.A.R.B. Tier Description Description Contents Nylon Line Head Installation AssemblyPlastic Shield Installation Remove Nylon Line Head Support Handle InstallationTo Advance Trimmer Line Operation Operation With BladesBlade Selection Handling Fuel FuelFuel Requirements Starting Cold Engine After useStarting Warm Engine Purge BulbMove stop switch button a backward to Stop position Stopping EngineSkill Levels MaintenanceMaintenance Intervals Air Filter Fuel FilterSpark Plug Cooling SystemExhaust System Spark Arrestor ScreenCarburetor Adjustment Exhaust Port CleaningEngine Break-In High Altitude OperationDrive Shaft flex cable models Gear HousingLubrication Nylon Line Head Disassembly Instructions Nylon Line ReplacementSharpening Metal Blades Maintenance Troubleshooting Engine Problem Troubleshooting ChartStorage Long Term Storage Over 30 DaysSpecifications ModelWarranty Statements OWNER’S ResponsibilityWarranty Statements SRM-225 ECHO, Incorporated